[fedora-arm] Failure to retrieve kernel

I am a little confused with the following, just tried
Fedora-Minimal-armhfp-24-20160422.n.0 on a Utilite-pro

Using U-Boot SPL 2016.03 (Apr 09 2016 - 14:33:27)
Trying to boot from MMC

U-Boot 2016.03 (Apr 09 2016 - 14:33:27 +0000)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: CM-FX6
I2C: ready
DRAM: 2 GiB
NAND: 0 MiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB,
total 2 MiB
Display: HDMI (1024x768)

Distorted logo

Using

U-Boot SPL 2016.03 (Apr 19 2016 - 15:07:05)
Trying to boot from MMC

U-Boot 2016.03 (Apr 19 2016 - 15:07:05 +0000)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: CM-FX6
I2C: ready
DRAM: 2 GiB
NAND: 0 MiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB,
total 2 MiB
Display: HDMI (1024x768)
In: serial
Out: vga
Err: vga
PCB: 1.0
Net: FEC
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
558 bytes read in 45 ms (11.7 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options.
1: Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl)
Enter choice: 1: Fedora-Minimal-armhfp-24-20160422.n.0
(4.5.1-300.fc24.armv7hl)
Retrieving file: /initramfs-4.5.1-300.fc24.armv7hl.img
40016290 bytes read in 1984 ms (19.2 MiB/s)
Skipping Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl)
for failure retrieving kernel
SCRIPT FAILED: continuing...
Found U-Boot script /boot.scr
2 bytes read in 40 ms (0 Bytes/s)
## Executing script at 17e00000
Wrong image format for "source" command
SCRIPT FAILED: continuing...
FEC Waiting for PHY auto negotiation to complete.......user interrupt!
BOOTP broadcast 1

extlinux.conf contains

# extlinux.conf generated by appliance-creator
ui menu.c32
menu autoboot Welcome to Fedora-Minimal-armhfp-24-20160422.n.0.
Automatic boot in # second{,s}. Press a key for options.
menu title Fedora-Minimal-armhfp-24-20160422.n.0 Boot Options.
menu hidden
timeout 20
totaltimeout 600

label Fedora-Minimal-armhfp-24-20160422.n.0 (4.5.1-300.fc24.armv7hl)
kernel /vmlinuz-4.5.1-300.fc24.armv7hl
append ro root=UUID=2bd7ab38-4655-40a2-bbe0-f2f83feb2b4f
console=ttymxc3,115200
fdtdir /dtb-4.5.1-300.fc24.armv7hl/
initrd /initramfs-4.5.1-300.fc24.armv7hl.img

The boot partition does contain the vmlinuz-4.5.1-300.fc24.armv7hl

I tried the same on a cuboxi-4pro, the system boots and generates output
on the serial connection, no problems with ssh either.

Regards

David
_______________________________________________
arm mailing list
arm@lists.fedoraproject.org
http://lists.fedoraproject.org/admin/lists/arm@lists.fedoraproject.org