[fedora-arm] Re: NanoPi Neo2, Rawhide-20180330: (probably) hangs in initial-setup

On 1 April 2018 at 04:37, Tomasz Kłoczko <kloczko.tomasz@gmail.com> wrote:
[..]
So I've left my NnoPi powered and ond the morning I found on console:

[ 4463.943146] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4463.956184] RTL8211E Gigabit Ethernet 0.2:07: attached PHY driver
[RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=0.2:07, irq=POLL)
[ 4464.004639] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management
Counters available
[ 4464.012846] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[ 4464.027487] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4516.416930] DMA-API: cacheline tracking ENOMEM, dma-debug disabled
[ 4516.423543] DMA-API: cacheline tracking ENOMEM, dma-debug disabled
[ 4536.767953] python3 (1214) used greatest stack depth: 9632 bytes left
[ 4536.774894] python3 (1202) used greatest stack depth: 9520 bytes left
[ OK ] Started Initial Setup configuration program.
[ OK ] Reached target Login Prompts (Pre).
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.

Fedora 29 (Rawhide)
Kernel 4.16.0-0.rc7.git1.1.fc29.aarch64 on an aarch64 (ttyS0)

localhost login: [ 8796.686735] IPv6: ADDRCONF(NETDEV_UP): eth0: link
is not ready
[13038.537106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[13129.146222] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[17821.059949] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

After plugging eth cable:

[21666.647917] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[FAILED] Failed to start Network Manager.
See 'systemctl status NetworkManager.service' for details.
[ OK ] Stopped Serial Getty on ttyS0.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Stopped OpenSSH server daemon.
[ OK ] Stopped target sshd-keygen.target.
Stopping sshd-keygen.target.
[ OK ] Reached target sshd-keygen.target.
Starting OpenSSH server daemon...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[FAILED] Failed to start OpenSSH server daemon.
See 'systemctl status sshd.service' for details.
[ OK ] Stopped Login Service.
Starting Login Service...
[ OK ] Stopped Network Manager.
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...

Fedora 29 (Rawhide)
Kernel 4.16.0-0.rc7.git1.1.fc29.aarch64 on an aarch64 (ttyS0)

localhost login:

So looks like I was right that everything was not instantly because
initial-setup has been doing something.
I've been trying to login but looks like root has some password.


After reboot at the end of boot sequence is:

[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
Starting NTP client/server...
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
Starting firewalld - dynamic firewall daemon...
Starting Login Service...
[ OK ] Started Secure Boot DBX (blacklist) updater.
[ OK ] Reached target sshd-keygen.target.
[FAILED] Failed to start NTP client/server.
See 'systemctl status chronyd.service' for details.
[FAILED] Failed to start firewalld - dynamic firewall daemon.
See 'systemctl status firewalld.service' for details.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Reached target Network (Pre).
Starting Network Manager...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped Login Service.
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped Login Service.
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped Login Service.
Starting Login Service...
[FAILED] Failed to start Network Manager.
See 'systemctl status NetworkManager.service' for details.
[ OK ] Started D-Bus System Message Bus.
[ OK ] Reached target Network.
[ OK ] Started Logout off all iSCSI sessions on shutdown.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
Starting OpenSSH server daemon...
[FAILED] Failed to start Login Service.
See 'systemctl status systemd-logind.service' for details.
[ OK ] Stopped Login Service.
Starting Login Service...
[ OK ] Stopped Network Manager.
[ OK ] Started D-Bus System Message Bus.
Starting Network Manager...
[ OK ] Started Permit User Sessions.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
[FAILED] Failed to start OpenSSH server daemon.
See 'systemctl status sshd.service' for details.
[ OK ] Started Hold until boot process finishes up.
[ OK ] Started Terminate Plymouth Boot Screen.

Fedora 29 (Rawhide)
Kernel 4.16.0-0.rc7.git1.1.fc29.aarch64 on an aarch64 (ttyS0)

localhost login:


So still something went wrong.

kloczek
--
Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org