Friday, February 16, 2024

[fedora-arm] Re: Fedora on Rock 5B

Hello Peter,

update from my side: booting with the last version v0.9.1 from and actual Fedora 40 Rawhide the installation works fine.

I'm writing this mail from this SBC.

root@rockpi5:~# inxi -F
 Host: rockpi5.reschke.lan
   Kernel: 6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64 arch: aarch64
   bits: 64
 Console: pty pts/1 Distro: Fedora Linux 41 (Rawhide Prerelease)
 Type: Embedded-pc Mobo: Radxa model: ROCK 5 Model B serial: 386F0C585A66D216
   UEFI: EDK II v: 0.9.1 date: 10/12/2023
 Info: triple core model: N/A bits: 64 type: MT MCP cache: L2: 2.5 MiB
 Speed: N/A min/max: N/A cores: No per core speed data found.
 Message: No PCI device data found.
 Display: server: X.Org v: 23.2.4 with: Xwayland v: 23.2.4 driver: X:
   loaded: modesetting dri: swrast gpu: N/A resolution: 1920x1080~60Hz
 API: EGL v: 1.5 drivers: kms_swrast,swrast
   platforms: gbm,x11,surfaceless,device
 API: OpenGL v: 4.5 vendor: mesa v: 24.0.0 renderer: llvmpipe (LLVM 17.0.6
   128 bits)
 API: Vulkan v: 1.3.268 drivers: llvmpipe surfaces: xcb,xlib
 Message: No device data found.
 API: ALSA v: k6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64
   status: kernel-api
 Device-1: Realtek RTL8852BE PCIe 802.11ax Wireless Network
   driver: rtw89_8852be
 IF: wlP2p1s0 state: up mac: 2c:05:47:8f:e9:e1
 Device-2: Realtek RTL8125 2.5GbE driver: r8169
 IF: enP4p1s0 state: up speed: 1000 Mbps duplex: full
   mac: 00:e0:4c:68:00:cd
 Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
   type: USB
 Report: btmgmt ID: hci0 state: up address: 00:1B:DC:0F:6E:EF bt-v: 2.1
 Local Storage: total: 953.87 GiB used: 21.93 GiB (2.3%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: MZVKW1T0HMLH-000H1
   size: 953.87 GiB
 ID-1: / size: 14.94 GiB used: 10.23 GiB (68.5%) fs: xfs dev: /dev/dm-0
 ID-2: /boot size: 960 MiB used: 413.3 MiB (43.1%) fs: xfs
   dev: /dev/nvme0n1p2
 ID-3: /boot/efi size: 598.8 MiB used: 11.7 MiB (1.9%) fs: vfat
   dev: /dev/nvme0n1p1
 ID-4: /home size: 99.94 GiB used: 11.29 GiB (11.3%) fs: xfs dev: /dev/dm-1
 ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) dev: /dev/zram0
 Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon
   or lm-sensors.
 Memory: total: 16 GiB note: est. available: 15.3 GiB used: 6.18 GiB (40.4%)
 Processes: 272 Uptime: 5h 50m Shell: Bash inxi: 3.3.32

What's not working at the moment:
- accelerate GPU

- sound via 3,5 mm Headphone

- Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa wireless A8)



Am 16.02.24 um 7:12 PM schrieb Peter Robinson:
Hi Folks,    
It's in my backlog of devices to play with for F-39.    It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else?  
  So I've finally started to look at this and yes, it looks like there's  issues with the SD card in Linux although apparently it should be  supported. I will be looking at that over the weekend.    I need to find a spare NVME drive to put in it.    The plan is to have some level of support in Fedora 40.    The upstream status as documented here is a pretty good overview of  where we're at upstream:    
On Sun, 30 Jul 2023, 13:18 Andreas Reschke, <> wrote:  
  Hi there,  I've tried to install Fedora on my Rock 5 without success.    Booting with  on SD-Card and source from    Board boots up fine but later starting in loop with  350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda  installer errors end ###############  [  352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:  timeout, still waiting for following initqueue hooks:  [  352.161387] dracut-initqueue[1065]: Warning:  /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\ "[ -e  "/dev/root" ]"  [  352.164564] dracut-initqueue[1065]: Warning:  /lib/dracut/hooks/initqueue/finished/ "[ "$main_loop"  -ge "10" ]"  [  352.167716] dracut-initqueue[1065]: Warning:  /lib/dracut/hooks/initqueue/finished/ "[ -f  /tmp/settle.done ]"  [  352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:  starting timeout scripts  [  352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda  installer errors begin #############  [  352.172852] dracut-initqueue[1065]: Warning: #                                    #  [  352.173097] dracut-initqueue[1065]: Warning: It seems that the boot  has failed. Possible causes include  [  352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or  inst.repo boot parameters on the  [  352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please  verify that you have specified  [  352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.  [  352.173918] dracut-initqueue[1065]: Warning: Please also note that  the 'inst.' prefix is now mandatory.  [  352.174156] dracut-initqueue[1065]: Warning: #                                    #  [  352.174354] dracut-initqueue[1065]: Warning: ####     Installer  errors encountered during boot:     ####  [  352.174543] dracut-initqueue[1065]: Warning: #                                    #  [  352.174775] dracut-initqueue[1065]: Warning: Reason unknown  [  352.174970] dracut-initqueue[1065]: Warning: #                                    #    Full log file: see rock.txt    Has anybody more succcess ?    Greetings  Andreas_______________________________________________  arm mailing list --  To unsubscribe send an email to  Fedora Code of Conduct:  List Guidelines:  List Archives:  Do not reply to spam, report it:  
--  _______________________________________________  arm mailing list --  To unsubscribe send an email to  Fedora Code of Conduct:  List Guidelines:  List Archives:  Do not reply to spam, report it:  

No comments:

Post a Comment