[fedora-arm] Re: U-Boot not working with imx6

2017-05-23 1:06 GMT+02:00 Andrew Gillis <andrew@vortexbox.org>:
> I am using an imx6 SoM from SolidRun. We have purchased a large number of
> these and mostly they work fine.
>
> I tried to update to Fedora 25 and now a few of them won't boot. (most work
> fine)
>
> All my SoMs are all supposed to be the same but some must be different. Both
> worked fine with an older version of Fedora
>
> Is there any way to just force a boot from MMC1 with no checks?
>
> I tried to update to the u-boot from Fedora 26 just to see if that would
> help. It does not.
>
>
> This is what I get with the "bad" ones
>
>
> U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29)
> Trying to boot from unknown boot device
> SPL: Unsupported Boot Device!
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
>
> The ones that boot correctly do this
>
>
> U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29)
> Trying to boot from MMC1
>
>
> U-Boot 2016.09.01 (Oct 19 2016 - 14:40:29 +0000)
>
> CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz)
> CPU: Commercial temperature grade (0C to 95C) at 28C
> Reset cause: POR
> Board: MX6 Hummingboard
> DRAM: 1 GiB
> MMC: FSL_SDHC: 0
> *** Warning - bad CRC, using default environment
It means that it's using the default environment because no custom env
was ever saved.
try (on the devices that do not boot)
resetenv
savenv




--
-

Nicolas (kwizart)
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org