[fedora-arm] Re: Hikey board (620) with Fedora 28 minimal cannot boot

On Tue, May 15, 2018 at 4:42 AM, RENARD Pierre-Francois
<pfrenard@gmail.com> wrote:
> Hey,
>
> I experienced not booting SD card when I forgot to unmount the SD before
> doing the dd command.
> (especially when another OS was on it)
> check mounts into /run/media/<username>
>

Thanks for the suggestion. However this is not my case. I don't have
any auto mount settings and I did not mount it before dd. I've tried
to dd again several times now but still no lucky.

> Fox
>
>
> On 05/14/2018 05:26 PM, Zamir SUN wrote:
>>
>> Hi,
>>
>> Today I am trying my HikeyBoard (620) with
>> Fedora-Minimal-28-1.1.aarch64.raw.xz. It simply cannot boot.
>>
>> I confirmed the xz image has the same hash as is shown on the mirror. I
>> used the following command to write to my TF card.
>> xzcat Fedora-Minimal-28-1.1.aarch64.raw.xz | sudo dd status=progress
>> bs=4M of=/dev/mmcblk0
>>
>> The system failed in dracut init queue timeout, with a warning "Warning:
>> /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not exist "
>>
>> However I confirmed the uuid is right for my partition.
>>
>> Besides, I cannot type anything via minicon to it so I cannot really
>> debug more right now. I am posting the last block of message via UART.
>>
>> So anyone have some hints for this? Thanks in advance!
>>
>> (P.S. Fedora 27 works fine on my hikey board).
>>
>>
>> [ 222.639468] dracut-initqueue[468]: Warning: dracut-initqueue timeout
>> - starts
>> [ 222.639909] dracut-initqueue[468]: Warning: Could not boot.
>>
>> Starting Setup Virtual Console...
>>
>> [ OK [ 222.716760] audit: type=1130 audit(1520288415.819:14): pid=1
>> uid=0 au'
>> ] Started Setup [ 222.738436] audit: type=1131
>> audit(1520288415.819:15): pid=1'
>> Virtual Console.
>>
>> Starting Dracut Emergency Shell...
>>
>> [ 222.825449] audit: type=1131 audit(1520288415.929:16): pid=1 uid=0
>> auid=4294'
>> Warning: /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not
>> exist
>>
>>
>> Generating "/run/initramfs/rdsosreport.txt"
>>
>> [ 222.897318] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 222.956555] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 222.967237] print_req_error: 6 callbacks suppressed
>>
>> [ 222.967243] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 222.985808] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [ 222.991640] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 223.001405] Buffer I/O error on dev mmcblk0, logical block 0, async
>> page read
>> [ 223.032457] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.089436] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.100132] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 223.114267] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [ 223.120128] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 223.129994] Buffer I/O error on dev mmcblk0, logical block 0, async
>> page read
>> [ 223.176307] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [ 223.182146] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 223.211348] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.268935] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.279748] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [ 223.285597] print_req_error: I/O error, dev mmcblk0, sector 2
>>
>> [ 223.313471] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.373025] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.442453] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.499139] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.533285] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.592543] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.663611] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.723301] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [ 223.757851] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [ 223.817927] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>>
> _______________________________________________
> arm mailing list -- arm@lists.fedoraproject.org
> To unsubscribe send an email to arm-leave@lists.fedoraproject.org



--
Ziqian SUN (Zamir)
zsun@fedoraproject.org
GPG : 1D86 6D4A 49CE 4BBD 72CF FCF5 D856 6E11 F2A0 525E
Want to know more about Fedora?
Visit https://fedoraproject.org/wiki/
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org