[fedora-arm] Re: Hikey board (620) with Fedora 28 minimal cannot boot

On 05/16/2018 01:08 AM, Jeremy Linton wrote:
> Hi,
>
> On 05/14/2018 10:26 AM, Zamir SUN wrote:
>> Hi,
>>
>> Today I am trying my HikeyBoard (620) with
>> Fedora-Minimal-28-1.1.aarch64.raw.xz. It simply cannot boot.
>
> So, two quick questions. What firmware & version are you using, and have
> you tried booting one of the installer images?
>
> (I tend to use the server iso image, and have had a decent bit of luck
> with it).
>

Thanks for the suggestions.

I believe I haven't updated firmware after Fedora 27 released. I'll try
the installer way later when I have some time.

>
>>
>> I confirmed the xz image has the same hash as is shown on the mirror.
>> I. used the following command to write to my TF card.
>> xzcat Fedora-Minimal-28-1.1.aarch64.raw.xz | sudo dd status=progress
>> bs=4M of=/dev/mmcblk0
>>
>> The system failed in dracut init queue timeout, with a warning "Warning:
>> /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not exist  "
>>
>> However I confirmed the uuid is right for my partition.
>>
>> Besides, I cannot type anything via minicon to it so I cannot really
>> debug more right now. I am posting the last block of message via UART.
>>
>> So anyone have some hints for this? Thanks in advance!
>>
>> (P.S. Fedora 27 works fine on my hikey board).
>>
>>
>> [  222.639468] dracut-initqueue[468]: Warning: dracut-initqueue timeout
>> - starts
>> [  222.639909] dracut-initqueue[468]: Warning: Could not boot.
>>
>>           Starting Setup Virtual Console...
>>
>> [  OK  [  222.716760] audit: type=1130 audit(1520288415.819:14): pid=1
>> uid=0 au'
>> ] Started Setup [  222.738436] audit: type=1131
>> audit(1520288415.819:15): pid=1'
>> Virtual Console.
>>
>>           Starting Dracut Emergency Shell...
>>
>> [  222.825449] audit: type=1131 audit(1520288415.929:16): pid=1 uid=0
>> auid=4294'
>> Warning: /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not
>> exist
>>
>>
>> Generating "/run/initramfs/rdsosreport.txt"
>>
>> [  222.897318] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  222.956555] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  222.967237] print_req_error: 6 callbacks suppressed
>>
>> [  222.967243] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  222.985808] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [  222.991640] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  223.001405] Buffer I/O error on dev mmcblk0, logical block 0, async
>> page read
>> [  223.032457] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.089436] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.100132] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  223.114267] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [  223.120128] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  223.129994] Buffer I/O error on dev mmcblk0, logical block 0, async
>> page read
>> [  223.176307] print_req_error: I/O error, dev mmcblk0, sector 0
>>
>> [  223.182146] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  223.211348] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.268935] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.279748] print_req_error: I/O error, dev mmcblk0, sector 1
>>
>> [  223.285597] print_req_error: I/O error, dev mmcblk0, sector 2
>>
>> [  223.313471] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.373025] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.442453] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.499139] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.533285] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.592543] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.663611] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.723301] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>> [  223.757851] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req
>> 400000H)
>> [  223.817927] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req
>> 1000000)
>>
>

--
Ziqian SUN (Zamir)
GPG : 1D86 6D4A 49CE 4BBD 72CF FCF5 D856 6E11 F2A0 525E
Want to know more about Fedora?
Visit https://fedoraproject.org/wiki/
Ready to contribute? See https://whatcanidoforfedora.org/
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org/message/NYSOCXAH3ZP3CLYPVZMZGBHCQTFKS5BE/