[fedora-arm] Re: Udoo Neo : USB known to work ?

Yes, it works if the USB is plugged in on boot. I didn't noticed that.

BTW, attached is the DT file for udoobuntu-udoo-neo


On Tue, Jun 26, 2018 at 7:14 AM, Peter Robinson <pbrobinson@gmail.com> wrote:
>>>> You might also like to try the 4.17.2 kernel
>>>> on it's ways to testing "dnf --enablerepo=updates-testing upgrade kernel\*"
>>
>> FYI, I tried the 4.17.2 kernel and still no USB devices are seen.
>
> So I managed to find mine and have a try.
>
> I'm still seeing the same issues I saw previously [1] but with a
> couple of power cycles it eventually booted to a point I could login.
>
> With a bit of poking around each time before it died I had a bit of a
> play and a few reboots before the file system was no longer
> recoverable I did mange to work out the following about usb. It
> actually works if you have the device plugged in from the outset, I
> tried an input device and a usb stick. So I suspect a GPIO or
> regulator isn't wired up via the DT properly.
>
> This was with F-28 GA release so I'm going to try the next nightly
> rawhide with 4.18 and a newer u-boot when I get a moment.
>
> Peter
>
> [1] https://paste.fedoraproject.org/paste/syIE1kuqBx6OLm48xRMB2A