Wednesday, April 21, 2021

[fedora-arm] Re: Jetson Nano: Access to GPIO header serial?

> I have an Nvidia Jetson Nano that I was gifted by the Fedora project to troubleshoot some arm specific packaging issues. That's done now so I decided to see what else I could do with it.
> I found NodeRED which had a module for the Raspberry Pi to control the GPIO. I have since forked that project and have made some progress porting it to the Nano.

From a GPIO PoV you should look at libgpiod and related pieces for
access to the GPIO, there's some threads about this on the mailing
list so look at the archives as a starter.

> Now I want to see if I can get the serial header working. From what I can tell if running the linux OS provided by Nvidia there should be a serial device named /dev/ttyTHS1 but it's not getting detected AFAICT grepping through dmesg.

The nano has two types of serial port, a traditional 8250 style UART,
of which the driver is built into the kernel as it's needed for the
serial console. The debug UART is the only one of those that is
enabled by default but there is 4 of them, there's also the HS UART
which is a high speed UART.

> I found the page for the serial-tegra that should be in the linux kernel but if I try:
> # modprobe serial-tegra
> Nothing happens, no output if I try adding "-v" as an option either. So does the module exist or not? If I try some random name in modprobe it gives an error which makes me think it's present, but it doesn't load and doesn't give me any helpful reason why.

I don't see the hsuart in the device tree, but there's some notes
there, I believe you need to configure one or the other but it will
likely need changes to the device tree which is why you won't see it.

I'm also not sure what the hsuart has to do with GPIO.

arm mailing list --
To unsubscribe send an email to
Fedora Code of Conduct:
List Guidelines:
List Archives:
Do not reply to spam on the list, report it:

No comments:

Post a Comment