[fedora-arm] Re: Pinebook Pro instructions for F-34

Am 06.05.21 um 21:47 schrieb Dan Horák:
> On Wed, 5 May 2021 17:51:33 +0200
> Andreas Reschke <arm_ml@rirasoft.de> wrote:
>
>> Am 04.05.21 um 16:58 schrieb Peter Robinson:
>>>>> U-Boot 2021.04 (Apr 28 2021 - 00:00:00)
>>>> U-Boot TPL 2021.04 (Apr 21 2021 - 00:00:00)
>>>> Channel 0: LPDDR4, 50MHz
>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>> Channel 1: LPDDR4, 50MHz
>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>>>> 256B stride
>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>>>> Trying to boot from BOOTROM
>>>> Returning to boot ROM...
>>>>
>>>> U-Boot SPL 2021.04 (Apr 21 2021 - 00:00:00 +0000)
>>>> Trying to boot from MMC2
>>>>
>>>>
>>>> U-Boot 2020.10-1 (Oct 14 2020 - 10:43:46 +0000) Manjaro ARM
>>> Yep, so you probably need to disable the EMMC because it's loading it
>>> from the EMMC for some reason.
>>>
>>> If it loads to Fedora you can also run "dd if=/dev/zero
>>> of=/dev/mmcblkX bs=1M count=10" (update the mmcblkX to the right one)
>>> to zero out the beginning of the EMMC if you don't care about the
>>> contents of it.
>>> _______________________________________________
>>> arm mailing list -- arm@lists.fedoraproject.org
>>> To unsubscribe send an email to arm-leave@lists.fedoraproject.org
>>> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>> List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
>>> Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
>> After "dd if=/dev/zero of=/dev/mmcblkX bs=1M count=10" I want to boot
>> with Fedora-Everything-netinst-aarch64-34-1.2.iso
>>
>> How to boot from USB?
> interrupt the autoboot countdown in u-boot and enter "run bootcmd_usb0"
>
> the installer probably starts OK (responds to pings), but the screen is
> off
>
>
> Dan
> _______________________________________________
> arm mailing list -- arm@lists.fedoraproject.org
> To unsubscribe send an email to arm-leave@lists.fedoraproject.org
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure


Hello Dan,

you're right, after  "run bootcmd_usb0" Fedora boots from USB. I've edit
the boot cmdline and removed "rhgb quite console=tty0".

So i run the installations process but the screen is off. Only network
access and serial console is working.

Andreas
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure