> Am 02.03.22 um 10:51 schrieb Peter Robinson:
> >> I have an RPi4 running Fedora 35. It hadn't been updated in a while, so
> >> I applied updates today. When I boot to the kernel 5.16.11-200, I lose
> >> the PPS device from my GPS hat. Boot back to 5.14.16-301.fc35 and it
> >> works.
> >> I'm booting with EFI firmware, and with a device tree config.txt that
> > All our firmware are EFI, that's the only way we support booting, is
> > it the default U-Boot based one or are you using the edk2 one?
> >> has "dtoverlay=pps-gpio,gpiopin=4" in it. I removed the /boot/dtb
> >> symlink and set /etc/u-boot.conf to not re-add it.
> >> When I boot 5.16, I see /proc/device-tree, and it has
> >> /proc/device-tree/pps@4 in it (and the contents look correct), but
> >> loading the pps-gpio kernel module just gives:
> >> pps-gpio: probe of pps@4 failed with error -22
> > Any chance you can tell us which kernel it started with, 5.14.x to
> > 5.16.x is a big window to debug and looking at kernel logs for
> > drivers/pps there's been no changes in that space in the 5.15+ kernels
> > at all.
> > I wonder if it's a change/regression in the firmware overlay <->
> > kernel interface.
> do you use the DTB file from 5.14.x or 5.16x?
I'm guessing this is fixed in the RPi firmware DTs with their rebase to 5.15.x?
I've not pushed newer firmware/DT to stable Fedora of late as we've
had a bunch of regressions on various RPi devices, currently upstream
firmware on Fedora doesn't boot on any 32 bit RPi device for example.
> I guess this is related to this commit:
> Unfortunately this is a change which requires this DTS fix:
> So DTB and kernel must "match".
> > _______________________________________________
> > arm mailing list -- firstname.lastname@example.org
> > To unsubscribe send an email to email@example.com
> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives: https://firstname.lastname@example.org
> > Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
arm mailing list -- email@example.com
To unsubscribe send an email to firstname.lastname@example.org
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://email@example.com
Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
Post a Comment