Fedora Info: [fedora-arm] Fedora on Rock 5B

��DDR Version V1.07 20220412
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
INFO: Preloader serial: 2
NOTICE: BL31: v2.3():v2.3-468-ge529a2760:derrick.huang
NOTICE: BL31: Built : 09:59:49, Nov 21 2022
INFO: spec: 0x1
INFO: ext 32k is not valid
INFO: ddr: stride-en 4CH
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO: system boots from cpu-hwid-0
INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO: BL31: Initialising Exception Handling Framework
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INFO: hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
UEFI firmware (version v0.7.1 built at 14:15:33 on Jun 1 2023)
dbi_base = 0xF5000000 apb_base = 0xFE150000 cfg_base = 0xF0000000
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x0
PCIe Linking... LTSSM is 0x1
PCIe Linking... LTSSM is 0x210021
PCIe Linking... LTSSM is 0x210022
PCIe Linking... LTSSM is 0x210022
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Linking... LTSSM is 0x210023
PCIe Link up, LTSSM is 0x230011
PCIe Init sucessfully (Gen3-x4, Bus-21692292)
RkFvbEntryPoint: BootDevice->DevType = 0x4
FvbValidateFvHeader: No Firmware Volume header present
FvbPrepareFvHeader: The FVB Header is not valid.
FvbPrepareFvHeader: Installing a correct one for this volume.
RK806Init(605): base: FEB20000
SpiCongig(565): 0: 0
buck_set_voltage: volt=750000, buck=1, reg=0x1A, mask=0xFF, val=0x28
buck_set_voltage: volt=750000, buck=3, reg=0x1C, mask=0xFF, val=0x28
buck_set_voltage: volt=750000, buck=4, reg=0x1D, mask=0xFF, val=0x28
buck_set_voltage: volt=850000, buck=5, reg=0x1E, mask=0xFF, val=0x38
buck_set_voltage: volt=2000000, buck=7, reg=0x20, mask=0xFF, val=0xB5
buck_set_voltage: volt=3300000, buck=8, reg=0x21, mask=0xFF, val=0xE9
buck_set_voltage: volt=1800000, buck=10, reg=0x23, mask=0xFF, val=0xAD
nldo_set_voltage: volt=750000, ldo=1, reg=0x43, mask=0xFF, val=0x14
nldo_set_voltage: volt=850000, ldo=2, reg=0x44, mask=0xFF, val=0x1C
nldo_set_voltage: volt=750000, ldo=3, reg=0x45, mask=0xFF, val=0x14
nldo_set_voltage: volt=850000, ldo=4, reg=0x46, mask=0xFF, val=0x1C
nldo_set_voltage: volt=750000, ldo=5, reg=0x47, mask=0xFF, val=0x14
pd_e_otgpd_e_otgpd_e_otgpd_e_otgpd_e_otgpd_e_otgSetFlashAttributeToUncache: GetMemorySpaceDescriptor status = 0
SetFlashAttributeToUncache: GetMemorySpaceDescriptor status = 0
- Found 'DBG2' ACPI Table
- Found 'FACP' ACPI Table
- Found 'GTDT' ACPI Table
- Found 'APIC' ACPI Table
- Found 'MCFG' ACPI Table
- Found 'IORT' ACPI Table
- Found 'SPCR' ACPI Table
- Found 'DSDT' ACPI Table
Board Serial Number: 386F0C585A66D216
InitComPhyConfig reg=FEE00000 FD5BC000 mode = 1
InitComPhyConfig reg=FEE10000 FD5C0000 mode = 1
InitComPhyConfig reg=FEE20000 FD5C4000 mode = 3
PciHostBridgeGetRootBridges
Error: Image at 000EAAEC000 start failed: Not Found
+++++SetEmmcClk: 400000, 2, 64
MMCSendCommand(951): MMC_CMD8 ERRI MmcStatus 0x18000,0x1
MMC_CMD REG:0x81A0000 0x1CE
Failed to SoftReset with mask 0x6000000
+++++SetEmmcClk: 400000, 2, 64
MMCSendCommand(951): MMC_CMD1 ERRI MmcStatus 0x18000,0x1
MMC_CMD REG:0x1020000 0x40FF8080
Failed to SoftReset with mask 0x6000000
XHCI: Initialize DWC3 at 0xFC000000
XHCI: Initialize DWC3 at 0xFC400000
XHCI: Initialize DWC3 at 0xFCD00000
[2J[04D[=3h[2J[09D[2J[04D[=3h[2J[09DRK3588NotifyReadyToBoot: called. Configure CPU voltages once.
buck_set_voltage: volt=675000, buck=2, reg=0x1B, mask=0xFF, val=0x1C
Card is SD2.0 => Supports high capacity
High capacity card.
- PrintOCR Ocr (0xC0FF8000)
- Card operating voltage: 2.7 to 3.6
- AccessMode: Block Mode (0x2)
- PowerUp
- PrintCID
- Manufacturing date: 9/19
- Product serial number: 0x568F503E
- Product revision: 128
- OEM ID: DS
- PrintRCA: 0xAAAA0520
- Status: 0x520
- RCA: 0xAAAA
- PrintCSD Version 2.00/High Capacity
- Supported card command class: 0x5B5
- Speed: 3.0 10Mbit/s
- Maximum Read Data Block: 512
- Maximum Write Data Block: 512
- Format (0): Hard disk-like file system with partition table
OHCI started for controller @ EFDF6C98, base address: 0xFC840000
OHCI started for controller @ EFDF7C18, base address: 0xFC8C0000
[0m[30m[40m[2J[04D[0m[37m[40m[02;32HGRUB version 2.06

[01C/----------------------------------------------------------------------------\[05;02H|[76C|[06;02H|[76C|[07;02H|[76C|[08;02H|[76C|[09;02H|[76C|[10;02H|[76C|[11;02H|[76C|[12;02H|[76C|[13;02H|[76C|[14;02H|[76C|[15;02H|[76C|[16;02H|[76C|[17;02H|[76C|[18;02H|[76C|[19;02H|[76C|[20;02H|[76C|[21;02H|[76C|[22;02H|[76C|[23;02H|[76C|[24;02H|[76C|[25;02H|[76C|[26;02H|[76C|[27;02H|[76C|[28;02H|[76C|[29;02H|[76C|[30;02H|[76C|[31;02H|[76C|[32;02H|[76C|[33;02H|[76C|[34;02H|[76C|[35;02H|[76C|[36;02H|[76C|[37;02H|[76C|[38;02H|[76C|[39;02H|[76C|[40;02H|[76C|[41;02H|[76C|[42;02H|[76C|[43;02H\----------------------------------------------------------------------------/[44;02H[45;02H Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. [05;80H
[05;03H Install Fedora Rawhide [01D[0m[30m[47m[06;03H*Test this media & install Fedora Rawhide [0m[37m[40m[01D[07;03H Troubleshooting --> [01D[08;03H [01D[09;03H [01D[10;03H [01D[11;03H [01D[12;03H [01D[13;03H [01D[14;03H [01D[15;03H [01D[16;03H [01D[17;03H [01D[18;03H [01D[19;03H [01D[20;03H [01D[21;03H [01D[22;03H [01D[23;03H [01D[24;03H [01D[25;03H [01D[26;03H [01D[27;03H [01D[28;03H [01D[29;03H [01D[30;03H [01D[31;03H [01D[32;03H [01D[33;03H [01D[34;03H [01D[35;03H [01D[36;03H [01D[37;03H [01D[38;03H [01D[39;03H [01D[40;03H [01D[41;03H [01D[42;03H [01D[02C
[06;78H[48;01H The highlighted entry will be executed automatically in 60s. [06;78H[48;01H [49;01H [06;78H[75D Test this media & install Fedora Rawhide [01D[0m[30m[47m[05;03H*Install Fedora Rawhide [0m[37m[40m[01D[0m[30m[40m[2J[01;01H[0m[37m[40m[0m[30m[40m[2J[04D[0m[37m[40mEFI stub: Decompressing Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.000000] Linux version 6.4.0-0.rc5.41.fc39.aarch64 (mockbuild@b0b46ea7ed994e4783aa0f414af7ed12) (gcc (GCC) 13.1.1 20230511 (Red Hat 13.1.1-2), GNU ld version 2.40-8.fc39) #1 SMP PREEMPT_DYNAMIC Mon Jun 5 16:55:18 UTC 2023
[ 0.000000] efi: EFI v2.7 by EDK II
[ 0.000000] efi: ACPI 2.0=0xeae30018 SMBIOS=0xeabe0000 SMBIOS 3.0=0xeabc0000 MEMATTR=0xefdf6018 MEMRESERVE=0xeafc2098
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000EAE30018 000024 (v02 RKCP )
[ 0.000000] ACPI: XSDT 0x00000000EAE3FE98 000064 (v01 RKCP RK3588 00000000 01000013)
[ 0.000000] ACPI: FACP 0x00000000EAE3FB98 000114 (v06 RKCP RK3588 00000000 EDK2 00000000)
[ 0.000000] ACPI: DSDT 0x00000000EAE3ED98 00092D (v02 RPIFDN RPI 00000002 INTL 20200925)
[ 0.000000] ACPI: DBG2 0x00000000EAE3FA98 00005C (v00 RKCP RK3588 00000000 EDK2 00000000)
[ 0.000000] ACPI: GTDT 0x00000000EAE3FD18 000060 (v02 ARMLTD ARM-JUNO 20140727 ARM 00000099)
[ 0.000000] ACPI: APIC 0x00000000EAE3E998 0002EC (v04 RKCP RK3588 00000000 EDK2 00000000)
[ 0.000000] ACPI: MCFG 0x00000000EAE3FE18 00003C (v01 RKCP RK3588 00000000 EDK2 00000000)
[ 0.000000] ACPI: IORT 0x00000000EAE3F818 000098 (v00 ARMLTD ARM-JUNO 20140727 ARM 00000099)
[ 0.000000] ACPI: SPCR 0x00000000EAE3FF98 000050 (v02 RKCP RK3588 00000000 EDK2 00000000)
[ 0.000000] ACPI: BGRT 0x00000000EAE3F918 000038 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SPCR: console: uart,mmio32,0xfeb50000
[ 0.000000] NUMA: Failed to initialise from firmware
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000003ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x3f9faae00-0x3f9fc1fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000003ffffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000001fffff]
[ 0.000000] node 0: [mem 0x0000000000200000-0x00000000007bffff]
[ 0.000000] node 0: [mem 0x00000000007c0000-0x00000000007effff]
[ 0.000000] node 0: [mem 0x00000000007f0000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000008400000-0x00000000093fffff]
[ 0.000000] node 0: [mem 0x0000000009400000-0x00000000e292afff]
[ 0.000000] node 0: [mem 0x00000000e292b000-0x00000000ea9dffff]
[ 0.000000] node 0: [mem 0x00000000ea9e0000-0x00000000eab6ffff]
[ 0.000000] node 0: [mem 0x00000000eab70000-0x00000000eae2ffff]
[ 0.000000] node 0: [mem 0x00000000eae30000-0x00000000eae3ffff]
[ 0.000000] node 0: [mem 0x00000000eae40000-0x00000000eafbffff]
[ 0.000000] node 0: [mem 0x00000000eafc0000-0x00000000effaffff]
[ 0.000000] node 0: [mem 0x00000000effb0000-0x00000000effdffff]
[ 0.000000] node 0: [mem 0x00000000effe0000-0x00000000efffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000003fbffffff]
[ 0.000000] node 0: [mem 0x00000003fc000000-0x00000003fc4fffff]
[ 0.000000] node 0: [mem 0x00000003fc500000-0x00000003ffefffff]
[ 0.000000] node 0: [mem 0x00000003fff00000-0x00000003ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000003ffffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x00000000d7600000
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 33 pages/cpu s94888 r8192 d32088 u135168
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz inst.stage2=hd:LABEL=Fedora-E-dvd-aarch64-rawh ro
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/images/pxeboot/vmlinuz", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4064256
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000d3600000-0x00000000d7600000] (64MB)
[ 0.000000] Memory: 15751028K/16515072K available (17920K kernel code, 4268K rwdata, 15160K rodata, 9792K init, 10753K bss, 698508K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 58908 entries in 231 pages
[ 0.000000] ftrace: allocated 231 pages with 6 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] Dynamic Preempt: voluntary
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 480 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000254] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000505] Console: colour dummy device 80x25
[ 0.000679] ACPI: Core revision 20230331
[ 0.000980] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000995] pid_max: default: 32768 minimum: 301
[ 0.001420] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
[ 0.001522] Yama: becoming mindful.
[ 0.001537] SELinux: Initializing.
[ 0.001881] LSM support for eBPF active
[ 0.001892] landlock: Up and running.
[ 0.002188] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.002238] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.003979] ACPI PPTT: No PPTT table found, CPU and cache topology may be inaccurate
[ 0.004026] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.005489] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005505] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.005687] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.005821] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.006192] rcu: Hierarchical SRCU implementation.
[ 0.006198] rcu: Max phase no-delay instances is 1000.
[ 0.007976] Remapping and enabling EFI services.
[ 0.012659] smp: Bringing up secondary CPUs ...
[ 0.014305] Detected VIPT I-cache on CPU1
[ 0.014360] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[ 0.014405] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 0.016049] Detected VIPT I-cache on CPU2
[ 0.016096] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[ 0.016134] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 0.017810] Detected VIPT I-cache on CPU3
[ 0.017852] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[ 0.017884] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 0.019552] CPU features: detected: Spectre-v4
[ 0.019557] CPU features: detected: Spectre-BHB
[ 0.019563] Detected PIPT I-cache on CPU4
[ 0.019586] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[ 0.019605] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[ 0.021259] Detected PIPT I-cache on CPU5
[ 0.021288] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[ 0.021308] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[ 0.022895] Detected PIPT I-cache on CPU6
[ 0.022922] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[ 0.022941] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[ 0.024575] Detected PIPT I-cache on CPU7
[ 0.024603] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[ 0.024622] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[ 0.024709] smp: Brought up 1 node, 8 CPUs
[ 0.024721] SMP: Total of 8 processors activated.
[ 0.024727] CPU features: detected: 32-bit EL0 Support
[ 0.024732] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.024737] CPU features: detected: Common not Private translations
[ 0.024742] CPU features: detected: CRC32 instructions
[ 0.024746] CPU features: detected: Data cache clean to Point of Persistence
[ 0.024753] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.024757] CPU features: detected: LSE atomic instructions
[ 0.024762] CPU features: detected: Privileged Access Never
[ 0.024766] CPU features: detected: RAS Extension Support
[ 0.024772] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.024885] CPU: All CPU(s) started at EL2
[ 0.024890] alternatives: applying system-wide alternatives
[ 0.035436] devtmpfs: initialized
[ 0.047272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.047293] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.048852] pinctrl core: initialized pinctrl subsystem
[ 0.049713] SMBIOS 3.3.0 present.
[ 0.049736] DMI: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.7.1 06/01/2023
[ 0.050802] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.052697] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.053880] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.055100] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.055196] audit: initializing netlink subsys (disabled)
[ 0.055446] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1
[ 0.056375] thermal_sys: Registered thermal governor 'fair_share'
[ 0.056384] thermal_sys: Registered thermal governor 'step_wise'
[ 0.056389] thermal_sys: Registered thermal governor 'user_space'
[ 0.056450] cpuidle: using governor menu
[ 0.056642] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.056860] ASID allocator initialised with 65536 entries
[ 0.057171] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.057585] Serial: AMBA PL011 UART driver
[ 0.058803] KASLR disabled due to lack of seed
[ 0.059919] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.059928] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.059934] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.059940] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.059945] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.059950] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.059956] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.059960] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.061336] cryptd: max_cpu_qlen set to 1000
[ 0.062577] raid6: skipped pq benchmark and selected neonx8
[ 0.062585] raid6: using neon recovery algorithm
[ 0.063144] ACPI: Added _OSI(Module Device)
[ 0.063151] ACPI: Added _OSI(Processor Device)
[ 0.063157] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.063162] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.064552] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.065379] ACPI: Interpreter enabled
[ 0.065384] ACPI: Using GIC for interrupt routing
[ 0.065615] ACPI: MCFG table detected, 1 entries
[ 0.073044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f])
[ 0.073072] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.073370] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR DPC]
[ 0.073861] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.075137] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0xf0000000-0xf0ffffff] not reserved in ACPI namespace
[ 0.075168] acpi PNP0A08:00: ECAM at [mem 0xf0000000-0xf0ffffff] for [bus 00-0f]
[ 0.075271] ACPI: Remapped I/O 0x00000000f0100000 to [io 0x0000-0xffff window]
[ 0.075483] PCI host bridge to bus 0000:00
[ 0.075492] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff window]
[ 0.075504] pci_bus 0000:00: root bus resource [mem 0x901000000-0x93fffffff window]
[ 0.075513] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
[ 0.075523] pci_bus 0000:00: root bus resource [bus 00-0f]
[ 0.075579] pci 0000:00:00.0: [144d:a804] type 00 class 0x010802
[ 0.075611] pci 0000:00:00.0: reg 0x10: [mem 0xf020c000-0xf020ffff 64bit]
[ 0.076110] pci 0000:00:01.0: [144d:a804] type 00 class 0x010802
[ 0.076141] pci 0000:00:01.0: reg 0x10: [mem 0xf020c000-0xf020ffff 64bit]
[ 0.076604] pci 0000:00:10.0: [144d:a804] type 00 class 0x010802
[ 0.076633] pci 0000:00:10.0: reg 0x10: [mem 0xf020c000-0xf020ffff 64bit]
[ 0.077104] pci 0000:00:11.0: [144d:a804] type 00 class 0x010802
[ 0.077133] pci 0000:00:11.0: reg 0x10: [mem 0xf020c000-0xf020ffff 64bit]
[ 0.077601] pci 0000:00:00.0: BAR 0: assigned [mem 0x901000000-0x901003fff 64bit]
[ 0.077625] pci 0000:00:01.0: BAR 0: assigned [mem 0x901004000-0x901007fff 64bit]
[ 0.077644] pci 0000:00:10.0: BAR 0: assigned [mem 0x901008000-0x90100bfff 64bit]
[ 0.077663] pci 0000:00:11.0: BAR 0: assigned [mem 0x90100c000-0x90100ffff 64bit]
[ 0.077685] pci_bus 0000:00: resource 4 [mem 0xf0200000-0xf0ffffff window]
[ 0.077695] pci_bus 0000:00: resource 5 [mem 0x901000000-0x93fffffff window]
[ 0.077704] pci_bus 0000:00: resource 6 [io 0x0000-0xffff window]
[ 0.080533] iommu: Default domain type: Translated
[ 0.080541] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.081240] SCSI subsystem initialized
[ 0.081584] ACPI: bus type USB registered
[ 0.081654] usbcore: registered new interface driver usbfs
[ 0.081710] usbcore: registered new interface driver hub
[ 0.081753] usbcore: registered new device driver usb
[ 0.081989] pps_core: LinuxPPS API ver. 1 registered
[ 0.081995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.082013] PTP clock support registered
[ 0.082235] EDAC MC: Ver: 3.0.0
[ 0.082750] scmi_core: SCMI protocol bus registered
[ 0.083343] efivars: Registered efivars operations
[ 0.085298] NetLabel: Initializing
[ 0.085304] NetLabel: domain hash size = 128
[ 0.085309] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.085394] NetLabel: unlabeled traffic allowed by default
[ 0.085418] mctp: management component transport protocol core
[ 0.085422] NET: Registered PF_MCTP protocol family
[ 0.085729] vgaarb: loaded
[ 0.117362] clocksource: Switched to clocksource arch_sys_counter
[ 0.254221] VFS: Disk quotas dquot_6.6.0
[ 0.254260] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.254473] pnp: PnP ACPI init
[ 0.254712] system 00:00: [mem 0xf5000000-0xf53fffff] has been reserved
[ 0.254721] system 00:00: [mem 0x900000000-0x900ffffff window] has been reserved
[ 0.254788] pnp: PnP ACPI: found 1 devices
[ 0.261856] NET: Registered PF_INET protocol family
[ 0.262186] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.270755] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.270887] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.270943] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.271919] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.273792] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.273995] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.274137] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.274492] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.274975] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.274996] NET: Registered PF_XDP protocol family
[ 0.275020] PCI: CLS 0 bytes, default 64
[ 0.275040] ACPI: bus type thunderbolt registered
[ 0.275347] Trying to unpack rootfs image as initramfs...
[ 0.275625] kvm [1]: IPA Size Limit: 40 bits
[ 0.275653] kvm [1]: GICv3: no GICV resource entry
[ 0.275656] kvm [1]: disabling GICv2 emulation
[ 0.275673] kvm [1]: GIC system register CPU interface enabled
[ 0.275692] kvm [1]: vgic interrupt IRQ9
[ 0.275721] kvm [1]: VHE mode initialized successfully
[ 0.276859] Initialise system trusted keyrings
[ 0.276893] Key type blacklist registered
[ 0.277058] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[ 0.277113] zbud: loaded
[ 0.278357] integrity: Platform Keyring initialized
[ 0.278380] integrity: Machine keyring initialized
[ 0.308198] NET: Registered PF_ALG protocol family
[ 0.308205] xor: measuring software checksum speed
[ 0.310029] 8regs : 5403 MB/sec
[ 0.311872] 32regs : 5352 MB/sec
[ 0.313216] arm64_neon : 7338 MB/sec
[ 0.313218] xor: using function: arm64_neon (7338 MB/sec)
[ 0.313224] Key type asymmetric registered
[ 0.313226] Asymmetric key parser 'x509' registered
[ 21.386600] Freeing initrd memory: 94404K
[ 21.412672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 21.412840] io scheduler mq-deadline registered
[ 21.412847] io scheduler kyber registered
[ 21.412922] io scheduler bfq registered
[ 21.420660] atomic64_test: passed
[ 21.429933] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 21.441022] HISI0031:00: ttyS0 at MMIO 0xfeb50000 (irq = 17, base_baud = 1500000) is a 16550A
[ 21.441071] printk: console [ttyS0] enabled
[ 21.592728] msm_serial: driver initialized
[ 21.593498] ACPI: bus type drm_connector registered
[ 21.596274] usbcore: registered new interface driver usbserial_generic
[ 21.596861] usbserial: USB Serial support registered for generic
[ 21.597543] mousedev: PS/2 mouse device common for all mice
[ 21.598499] rtc-efi rtc-efi.0: registered as rtc0
[ 21.598966] rtc-efi rtc-efi.0: setting system clock to 2023-06-01T14:15:57 UTC (1685628957)
[ 21.599973] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 21.601046] device-mapper: uevent: version 1.0.3
[ 21.601636] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 21.602485] ghes_edac: GHES probing device list is empty
[ 21.602847] ledtrig-cpu: registered to indicate activity on CPUs
[ 21.604571] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 21.607871] fbcon: Deferring console take-over
[ 21.608266] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 21.609252] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 21.609937] hid: raw HID events driver (C) Jiri Kosina
[ 21.610460] usbcore: registered new interface driver usbhid
[ 21.610946] usbhid: USB HID core driver
[ 21.611828] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
[ 21.612757] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
[ 21.613750] drop_monitor: Initializing network drop monitor service
[ 21.651928] Initializing XFRM netlink socket
[ 21.652441] NET: Registered PF_INET6 protocol family
[ 21.671972] Segment Routing with IPv6
[ 21.672300] RPL Segment Routing with IPv6
[ 21.672675] In-situ OAM (IOAM) with IPv6
[ 21.673059] mip6: Mobile IPv6
[ 21.673326] NET: Registered PF_PACKET protocol family
[ 21.678609] registered taskstats version 1
[ 21.679591] Loading compiled-in X.509 certificates
[ 21.735499] Loaded X.509 cert 'Fedora kernel signing key: 25b9d87f129731b23804fdd80e318fa7a978427c'
[ 21.743050] page_owner is disabled
[ 21.743488] Key type .fscrypt registered
[ 21.743832] Key type fscrypt-provisioning registered
[ 21.745571] Btrfs loaded, zoned=yes, fsverity=yes
[ 21.746075] Key type big_key registered
[ 21.747143] Key type encrypted registered
[ 21.747693] ima: secureboot mode disabled
[ 21.748048] ima: No TPM chip found, activating TPM-bypass!
[ 21.748534] Loading compiled-in module X.509 certificates
[ 21.750922] Loaded X.509 cert 'Fedora kernel signing key: 25b9d87f129731b23804fdd80e318fa7a978427c'
[ 21.751713] ima: Allocated hash algorithm: sha256
[ 21.752143] ima: No architecture policies found
[ 21.752563] evm: Initialising EVM extended attributes:
[ 21.753011] evm: security.selinux
[ 21.753302] evm: security.SMACK64 (disabled)
[ 21.753675] evm: security.SMACK64EXEC (disabled)
[ 21.754077] evm: security.SMACK64TRANSMUTE (disabled)
[ 21.754518] evm: security.SMACK64MMAP (disabled)
[ 21.754921] evm: security.apparmor (disabled)
[ 21.755301] evm: security.ima
[ 21.755561] evm: security.capability
[ 21.755874] evm: HMAC attrs: 0x1
[ 21.861494] alg: No test for 842 (842-scomp)
[ 21.861980] alg: No test for 842 (842-generic)
[ 22.382651] clk: Disabling unused clocks
[ 22.383133] dw-apb-uart HISI0031:00: forbid DMA for kernel console
[ 22.389331] Freeing unused kernel memory: 9792K
[ 22.528122] Checked W+X mappings: passed, no W+X pages found
[ 22.528649] Run /init as init process
[ 22.563241] systemd[1]: systemd 253.5-1.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 22.566063] systemd[1]: Detected architecture arm64.
[ 22.566505] systemd[1]: Running in initrd.

Welcome to [0;38;2;60;110;180mFedora Linux 39 (Rawhide Prerelease) dracut-059-7.fc39 (Initramfs)[0m!

[ 22.597895] systemd[1]: No hostname configured, using default hostname.
[ 22.599341] systemd[1]: Hostname set to <fedora>.
[ 22.600479] systemd[1]: Initializing machine ID from random generator.
[ 23.407500] systemd[1]: bpf-lsm: LSM BPF program attached
[ 23.449220] systemd-gpt-auto-generator[213]: EFI loader partition unknown, exiting.
[ 23.449905] systemd-gpt-auto-generator[213]: (The boot loader did not set EFI variable LoaderDevicePartUUID.)
[ 23.740063] systemd[1]: Queued start job for default target initrd.target.
[ 23.830771] systemd[1]: Reached target initrd-root-device.target - Initrd Root Device.
[[0;32m OK [0m] Reached target [0;1;39minitrd-root…e.target[0m - Initrd Root Device.
[ 23.857631] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
[[0;32m OK [0m] Reached target [0;1;39minitrd-usr-…get[0m - Initrd /usr File System.
[ 23.887814] systemd[1]: Reached target slices.target - Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mslices.target[0m - Slice Units.
[ 23.917585] systemd[1]: Reached target swap.target - Swaps.
[[0;32m OK [0m] Reached target [0;1;39mswap.target[0m - Swaps.
[ 23.947558] systemd[1]: Reached target timers.target - Timer Units.
[[0;32m OK [0m] Reached target [0;1;39mtimers.target[0m - Timer Units.
[ 23.978510] systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
[[0;32m OK [0m] Listening on [0;1;39mdbus.socket[…- D-Bus System Message Bus Socket.
[ 24.008112] systemd[1]: Listening on iscsid.socket - Open-iSCSI iscsid Socket.
[[0;32m OK [0m] Listening on [0;1;39miscsid.socket[0m - Open-iSCSI iscsid Socket.
[ 24.038043] systemd[1]: Listening on iscsiuio.socket - Open-iSCSI iscsiuio Socket.
[[0;32m OK [0m] Listening on [0;1;39miscsiuio.sock…[0m - Open-iSCSI iscsiuio Socket.
[ 24.068732] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39msystemd-journ…t[0m - Journal Socket (/dev/log).
[ 24.098766] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39msystemd-journald.socket[0m - Journal Socket.
[ 24.128874] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39msystemd-udevd….socket[0m - udev Control Socket.
[ 24.158639] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39msystemd-udevd…l.socket[0m - udev Kernel Socket.
[ 24.187595] systemd[1]: Reached target sockets.target - Socket Units.
[[0;32m OK [0m] Reached target [0;1;39msockets.target[0m - Socket Units.
[ 24.288092] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
Starting [0;1;39mkmod-static-nodes…ate List of Static Device Nodes...
[ 24.323944] systemd[1]: Started rngd.service - Hardware RNG Entropy Gatherer Daemon.
[[0;32m OK [0m] Started [0;1;39mrngd.service[0m -…dware RNG Entropy Gatherer Daemon.
[ 24.360036] systemd[1]: Starting systemd-journald.service - Journal Service...
Starting [0;1;39msystemd-journald.service[0m - Journal Service...
[ 24.395783] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
Starting [0;1;39msystemd-modules-l…rvice[0m - Load Kernel Modules...
[ 24.424361] systemd[1]: Starting systemd-sysusers.service - Create System Users...
Starting [0;1;39msystemd-sysusers.…rvice[0m - Create System Users...
[ 24.443218] systemd-journald[269]: Collecting audit messages is disabled.
[ 24.451410] alua: device handler registered
[ 24.454668] systemd[1]: Starting systemd-vconsole-setup.service - Setup Virtual Console...
[ 24.455627] emc: device handler registered
Starting [0;1;39msystemd-vconsole-…ice[0m - Setup Virtual Console...
[ 24.460259] rdac: device handler registered
[ 24.608270] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[[0;32m OK [0m] Finished [0;1;39mkmod-static-nodes…reate List of Static Device Nodes.
[ 24.638406] systemd[1]: Started systemd-journald.service - Journal Service.
[[0;32m OK [0m] Started [0;1;39msystemd-journald.service[0m - Journal Service.
[[0;32m OK [0m] Finished [0;1;39msystemd-modules-l…service[0m - Load Kernel Modules.
[[0;32m OK [0m] Finished [0;1;39msystemd-vconsole-…rvice[0m - Setup Virtual Console.
Starting [0;1;39mdracut-cmdline-as…r additional cmdline parameters...
Starting [0;1;39msystemd-sysctl.se…ce[0m - Apply Kernel Variables...
[[0;32m OK [0m] Finished [0;1;39msystemd-sysusers.service[0m - Create System Users.
[[0;32m OK [0m] Finished [0;1;39mdracut-cmdline-as…for additional cmdline parameters.
[[0;32m OK [0m] Finished [0;1;39msystemd-sysctl.service[0m - Apply Kernel Variables.
Starting [0;1;39mdracut-cmdline.service[0m - dracut cmdline hook...
Starting [0;1;39msystemd-tmpfiles-…ate Static Device Nodes in /dev...
Starting [0;1;39msystemd-tmpfiles-… Volatile Files and Directories...
[[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…reate Static Device Nodes in /dev.
[[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…te Volatile Files and Directories.
[ 26.085787] Loading iSCSI transport class v2.0-870.
[ 26.110632] iscsi: registered transport (tcp)
[ 26.166363] iscsi: registered transport (qla4xxx)
[ 26.166822] QLogic iSCSI HBA Driver
[ 26.184532] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[ 26.221217] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[ 26.221805] iscsi: registered transport (cxgb3i)
[ 26.319182] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[ 26.319805] iscsi: registered transport (cxgb4i)
[ 26.320210] cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled.
[ 26.342678] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 26.355216] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 26.355881] iscsi: registered transport (bnx2i)
[ 26.378160] iscsi: registered transport (be2iscsi)
[ 26.378582] In beiscsi_module_init, tt=(____ptrval____)
[[0;32m OK [0m] Finished [0;1;39mdracut-cmdline.service[0m - dracut cmdline hook.
Starting [0;1;39mdracut-pre-udev.s…vice[0m - dracut pre-udev hook...
[ 26.738545] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 26.890718] hp_sw: device handler registered
[ 26.949674] dracut-pre-udev[608]: anaconda-modprobe: Module edd not found
[ 26.980272] dracut-pre-udev[608]: anaconda-modprobe: Module iscsi_ibft not found
[ 27.089618] async_tx: api initialized (async)
[ 27.648342] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 27.988363] RPC: Registered named UNIX socket transport module.
[ 27.988891] RPC: Registered udp transport module.
[ 27.989302] RPC: Registered tcp transport module.
[ 27.989712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[[0;32m OK [0m] Finished [0;1;39mdracut-pre-udev.service[0m - dracut pre-udev hook.
Starting [0;1;39msystemd-udevd.ser…ger for Device Events and Files...
[[0;32m OK [0m] Started [0;1;39msystemd-udevd.serv…nager for Device Events and Files.
Starting [0;1;39mdracut-pre-trigge…e[0m - dracut pre-trigger hook...
[[0;32m OK [0m] Finished [0;1;39mdracut-pre-trigge…ice[0m - dracut pre-trigger hook.
Starting [0;1;39msystemd-udev-trig…[0m - Coldplug All udev Devices...
[[0;32m OK [0m] Created slice [0;1;39msystem-modpr…lice[0m - Slice /system/modprobe.
Starting [0;1;39mmodprobe@configfs…m - Load Kernel Module configfs...
[[0;32m OK [0m] Finished [0;1;39mmodprobe@configfs…[0m - Load Kernel Module configfs.
[[0;32m OK [0m] Finished [0;1;39msystemd-udev-trig…e[0m - Coldplug All udev Devices.
[ 29.709675] xhci-hcd PNP0D10:00: xHCI Host Controller
[ 29.710463] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 1
[ 29.711285] xhci-hcd PNP0D10:00: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000010010
[ 29.712149] xhci-hcd PNP0D10:00: irq 18, io mem 0xfc000000
[ 29.712880] xhci-hcd PNP0D10:00: xhci_plat_probe get usb3phy fail (ret=-22)
[ 29.713498] xhci-hcd PNP0D10:00: xHCI Host Controller
[ 29.725236] ahci RKCP0161:00: supply ahci not found, using dummy regulator
[ 29.725920] ahci RKCP0161:00: supply phy not found, using dummy regulator
[ 29.726539] ahci RKCP0161:00: supply target not found, using dummy regulator
[ 29.726617] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
[ 29.727228] ahci RKCP0161:00: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode
[ 29.728539] ahci RKCP0161:00: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[ 29.728933] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed
[ 29.729799] scsi host0: ahci
[ 29.730348] ata1: DUMMY
[ 29.730720] ahci RKCP0161:01: supply ahci not found, using dummy regulator
[ 29.731386] ahci RKCP0161:01: supply phy not found, using dummy regulator
[ 29.731957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 29.732004] ahci RKCP0161:01: supply target not found, using dummy regulator
[ 29.732703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.733360] ahci RKCP0161:01: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x0 impl platform mode
[ 29.733945] usb usb1: Product: xHCI Host Controller
[ 29.734667] ahci RKCP0161:01: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[ 29.735096] usb usb1: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.736465] usb usb1: SerialNumber: PNP0D10:00
[ 29.737698] hub 1-0:1.0: USB hub found
[ 29.738114] hub 1-0:1.0: 1 port detected
[ 29.747917] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 29.748836] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 29.749540] scsi host1: ahci
[ 29.749571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.750030] ata2: DUMMY
[ 29.750454] usb usb2: Product: xHCI Host Controller
[ 29.751101] usb usb2: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.751738] usb usb2: SerialNumber: PNP0D10:00
[ 29.803829] hub 2-0:1.0: USB hub found
[ 29.804201] hub 2-0:1.0: 1 port detected
[ 29.829971] xhci-hcd PNP0D10:01: xHCI Host Controller
[ 29.856091] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 3
[ 29.856837] xhci-hcd PNP0D10:01: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000010010
[ 29.857810] xhci-hcd PNP0D10:01: irq 19, io mem 0xfc400000
[ 29.858441] xhci-hcd PNP0D10:01: xhci_plat_probe get usb3phy fail (ret=-22)
[ 29.859050] xhci-hcd PNP0D10:01: xHCI Host Controller
Mounting [0;1;39msys-kernel-config…ernel Configuration File System...
[ 29.889579] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 4
[ 29.890227] xhci-hcd PNP0D10:01: Host supports USB 3.0 SuperSpeed
[ 29.890862] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 29.891586] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.892218] usb usb3: Product: xHCI Host Controller
[ 29.892645] usb usb3: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.893275] usb usb3: SerialNumber: PNP0D10:01
[ 29.899211] hub 3-0:1.0: USB hub found
[ 29.899568] hub 3-0:1.0: 1 port detected
[ 29.900149] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 29.900915] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 29.901638] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.902269] usb usb4: Product: xHCI Host Controller
[ 29.902697] usb usb4: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.903327] usb usb4: SerialNumber: PNP0D10:01
[ 29.906684] hub 4-0:1.0: USB hub found
[ 29.907445] hub 4-0:1.0: 1 port detected
[ 29.908950] xhci-hcd PNP0D10:02: xHCI Host Controller
[ 29.908995] nvme 0000:00:01.0: can't derive routing for PCI INT A
[ 29.909218] nvme nvme0: pci function 0000:00:00.0
[ 29.909353] nvme 0000:00:10.0: can't derive routing for PCI INT A
[ 29.909364] nvme 0000:00:10.0: PCI INT A: no GSI
[ 29.909447] nvme 0000:00:11.0: can't derive routing for PCI INT A
[ 29.909936] nvme 0000:00:01.0: PCI INT A: no GSI
[ 29.910347] nvme 0000:00:11.0: PCI INT A: no GSI
[ 29.912752] nvme nvme1: pci function 0000:00:10.0
[ 29.912753] nvme nvme2: pci function 0000:00:11.0
[ 29.912754] nvme nvme0: pci function 0000:00:01.0
[ 29.912844] ------------[ cut here ]------------
[ 29.913095] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 5
[ 29.913290] xhci-hcd PNP0D10:02: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000010010
[ 29.913582] WARNING: CPU: 4 PID: 12 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x40/0x58
[ 29.914046] xhci-hcd PNP0D10:02: irq 20, io mem 0xfcd00000
[ 29.914398] Modules linked in: nvme
[ 29.915302] xhci-hcd PNP0D10:02: xhci_plat_probe get usb3phy fail (ret=-22)
[ 29.915807] crct10dif_ce polyval_ce polyval_generic
[ 29.916583] xhci-hcd PNP0D10:02: xHCI Host Controller
[ 29.917058] ghash_ce nvme_core
[ 29.917788] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 6
[ 29.917970] ahci_platform libahci_platform nvme_common
[ 29.918418] xhci-hcd PNP0D10:02: Host supports USB 3.0 SuperSpeed
[ 29.918846] xhci_plat_hcd(+) sunrpc
[ 29.919350] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 29.919750] lrw dm_crypt dm_round_robin
[ 29.920211] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.920738] linear raid10
[ 29.921055] usb usb5: Product: xHCI Host Controller
[ 29.921770] raid456 async_raid6_recov
[ 29.922115] usb usb5: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.922740] async_memcpy async_pq
[ 29.922980] usb usb5: SerialNumber: PNP0D10:02
[ 29.923404] async_xor async_tx
[ 29.924296] hub 5-0:1.0: USB hub found
[ 29.924360] raid1 raid0 scsi_dh_hp_sw
[ 29.924708] hub 5-0:1.0: 1 port detected
[ 29.925050] squashfs be2iscsi bnx2i
[ 29.925871] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 29.925981] cnic uio cxgb4i cxgb4
[ 29.926492] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
[ 29.926640] tls cxgb3i cxgb3
[ 29.927386] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 29.927643] mdio libcxgbi libcxgb
[ 29.928365] usb usb6: Product: xHCI Host Controller
[ 29.928622] qla4xxx iscsi_boot_sysfs
[ 29.929254] usb usb6: Manufacturer: Linux 6.4.0-0.rc5.41.fc39.aarch64 xhci-hcd
[ 29.929549] iscsi_tcp libiscsi_tcp
[ 29.929978] usb usb6: SerialNumber: PNP0D10:02
[ 29.930294] libiscsi scsi_transport_iscsi
[ 29.931531] hub 6-0:1.0: USB hub found
[ 29.931614] scsi_dh_rdac scsi_dh_emc scsi_dh_alua
[ 29.932018] hub 6-0:1.0: 1 port detected
[ 29.932303] dm_multipath
[ 29.932308] CPU: 4 PID: 12 Comm: kworker/u16:1 Not tainted 6.4.0-0.rc5.41.fc39.aarch64 #1
[ 29.934004] Hardware name: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.7.1 06/01/2023
[ 29.934008] Workqueue: events_unbound async_run_entry_fn
[ 29.934018] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 29.934025] pc : pci_msi_setup_msi_irqs+0x40/0x58
[ 29.934033] lr : msix_capability_init+0x200/0x310
[ 29.936606] sp : ffff80000b97b840
[ 29.936608] x29: ffff80000b97b840 x28: 0000000000000000 x27: 0000000000000000
[ 29.936616] x26: ffff00010036f0d0 x25: ffff00010036f800 x24: 0000000000000000
[ 29.937531] x23: 0000000000000001 x22: 0000000000000007 x21: 0000000000000000
[ 29.937537] x20: 0000000000000000 x19: ffff00010036f000 x18: ffffffffffffffff
[ 29.937543] x17: 0000000018f2fa3e x16: 00000000ebe75240 x15: ffff80000b97b6b0
[ 29.937550] x14: 0140000000000000 x13: 0100000000000041 x12: 00008008f4d02000
[[0;32m OK [0m] Reached target [0;1;39mnetwork.target[0m -[ 29.937557] x11: 0000000000000001 x10: ffff80000c50d000 x9 : ffff800008944c20
[ 29.940659] x8 : ffff000113ac9500 x7 : 0000000000000000 x6 : 0000000000000030
Network.
[ 29.940666] x5 : ffff80000b97b6c0 x4 : 0000000000000000 x3 : 0000000000000000
[ 29.940671] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff00010036f0d0
[ 29.940677] Call trace:
[ 29.940681] pci_msi_setup_msi_irqs+0x40/0x58
[ 29.940688] __pci_enable_msix_range+0x228/0x300
[ 29.940696] pci_alloc_irq_vectors_affinity+0xc4/0x150
[ 29.940703] pci_alloc_irq_vectors+0x1c/0x30
[ 29.940709] nvme_pci_enable+0x74/0x228 [nvme]
[ 29.945888] nvme_probe+0x114/0x370 [nvme]
[ 29.946267] local_pci_probe+0x48/0xb8
[ 29.946601] pci_call_probe+0x5c/0x1a0
[ 29.946935] pci_device_probe+0x88/0x108
[ 29.947286] really_probe+0x190/0x3d8
[ 29.947293] __driver_probe_device+0x84/0x180
[ 29.947299] driver_probe_device+0x44/0x120
[ 29.948362] __driver_attach_async_helper+0x58/0x100
Starting [0;1;39mdracut-initqueue.…ice[0m - dracut [ 29.948800] async_run_entry_fn+0x40/0x178
initqueue hook...
[ 29.949636] process_one_work+0x1e4/0x488
[ 29.950128] worker_thread+0x74/0x418
[ 29.950451] kthread+0xf4/0x108
[ 29.950732] ret_from_fork+0x10/0x20
[ 29.951051] ---[ end trace 0000000000000000 ]---
[ 29.951522] ------------[ cut here ]------------
[ 29.951925] WARNING: CPU: 4 PID: 12 at drivers/pci/msi/msi.h:127 pci_msi_teardown_msi_irqs+0x28/0x68
[ 29.952729] Modules linked in: nvme crct10dif_ce polyval_ce polyval_generic ghash_ce nvme_core ahci_platform libahci_platform nvme_common xhci_plat_hcd sunrpc lrw dm_crypt dm_round_robin linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 scsi_dh_hp_sw squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_multipath
[ 29.956662] CPU: 4 PID: 12 Comm: kworker/u16:1 Tainted: G W ------- --- 6.4.0-0.rc5.41.fc39.aarch64 #1
[ 29.956667] Hardware name: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.7.1 06/01/2023
[ 29.956669] Workqueue: events_unbound async_run_entry_fn
[ 29.956676] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Starting [0;1;39mplymouth-start.se…[0m - Show Plymou[ 29.959362] pc : pci_msi_teardown_msi_irqs+0x28/0x68
th Boot Screen...
[ 29.960281] lr : msix_capability_init+0x158/0x310
[ 29.960837] sp : ffff80000b97b830
[ 29.961128] x29: ffff80000b97b830 x28: 0000000000000000 x27: 0000000000000000
[ 29.961755] x26: ffff00010036f0d0 x25: ffff00010036f800 x24: 0000000000000000
[ 29.962381] x23: 0000000000000001 x22: 0000000000000007 x21: 00000000ffffffed
[ 29.963007] x20: 0000000000000000 x19: ffff00010036f000 x18: ffffffffffffffff
[ 29.963634] x17: 0000000018f2fa3e x16: 00000000ebe75240 x15: ffff80000b97b6b0
[ 29.964260] x14: 0140000000000000 x13: 0100000000000041 x12: 00008008f4d02000
[ 29.964887] x11: 0000000000000001 x10: ffff80000c50d000 x9 : ffff800008944b78
[ 29.965515] x8 : ffff000113ac9500 x7 : 0000000000000000 x6 : 0000000000000030
[ 29.965521] x5 : ffff80000b97b6c0 x4 : 0000000000000000 x3 : 0000000000000000
[ 29.965527] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff00010036f0d0
[ 29.967391] Call trace:
Starting [0;1;39msystemd-udev-sett… Complete Device [ 29.967607] pci_msi_teardown_msi_irqs+0x28/0x68
Initialization...
[ 29.968494] msix_capability_init+0x158/0x310
[ 29.969021] __pci_enable_msix_range+0x228/0x300
[ 29.969028] pci_alloc_irq_vectors_affinity+0xc4/0x150
[ 29.969035] pci_alloc_irq_vectors+0x1c/0x30
[ 29.970258] nvme_pci_enable+0x74/0x228 [nvme]
[ 29.970668] nvme_probe+0x114/0x370 [nvme]
[ 29.971048] local_pci_probe+0x48/0xb8
[ 29.971382] pci_call_probe+0x5c/0x1a0
[ 29.971716] pci_device_probe+0x88/0x108
[ 29.972066] really_probe+0x190/0x3d8
[ 29.972072] __driver_probe_device+0x84/0x180
[ 29.972078] driver_probe_device+0x44/0x120
[ 29.973142] __driver_attach_async_helper+0x58/0x100
[ 29.973580] async_run_entry_fn+0x40/0x178
[ 29.973942] process_one_work+0x1e4/0x488
[ 29.974295] worker_thread+0x74/0x418
[ 29.974617] kthread+0xf4/0x108
[ 29.974898] ret_from_fork+0x10/0x20
[ 29.975216] ---[ end trace 0000000000000000 ]---
[ 29.979637] nvme: probe of 0000:00:11.0 failed with error -22
[2J[3J[-1;-1f[[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System.
[[0;32m OK [0m] Started [0;1;39mplymouth-start.ser…e[0m - Show Plymouth Boot Screen.
[[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo…uests to Plymouth Directory Watch.
[[0;32m OK [0m] Reached target [0;1;39mcryptsetup.…get[0m - Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mpaths.target[0m - Path Units.
[ 30.102486] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
[ 30.338558] systemd-gpt-auto-generator[1095]: EFI loader partition unknown, exiting.
[ 30.339256] systemd-gpt-auto-generator[1095]: (The boot loader did not set EFI variable LoaderDevicePartUUID.)
[[0;32m OK [0m] Finished [0;1;39msystemd-udev-sett…To Complete Device Initialization.
Starting [0;1;39mmultipathd.servic…per Multipath Device Controller...
[[0;32m OK [0m] Started [0;1;39mmultipathd.service…apper Multipath Device Controller.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization.
[[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System.
[ 187.467377] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 187.469415] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 187.473337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 187.477200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 187.482582] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 187.483402] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 187.483737] dracut-initqueue[1065]: Warning: # #
[ 187.484054] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 187.484383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 187.484694] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 187.484961] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 187.485282] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 187.485524] dracut-initqueue[1065]: Warning: # #
[ 187.485841] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 187.486099] dracut-initqueue[1065]: Warning: # #
[ 187.486402] dracut-initqueue[1065]: Warning: Reason unknown
[ 187.486643] dracut-initqueue[1065]: Warning: # #
[ 187.486952] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 189.120808] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 189.122922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 189.126704] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 189.130485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 189.135624] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 189.136460] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 189.136784] dracut-initqueue[1065]: Warning: # #
[ 189.137103] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 189.137431] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 189.137739] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 189.137981] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 189.138307] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 189.138554] dracut-initqueue[1065]: Warning: # #
[ 189.138871] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 189.139109] dracut-initqueue[1065]: Warning: # #
[ 189.139419] dracut-initqueue[1065]: Warning: Reason unknown
[ 189.139664] dracut-initqueue[1065]: Warning: # #
[ 189.139973] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 190.741582] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 190.743676] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 190.747453] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 190.751245] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 190.756484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 190.757315] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 302.815384] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 302.816018] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 302.816271] dracut-initqueue[1065]: Warning: # #
[ 302.816526] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 302.816733] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 302.816984] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 302.817207] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 302.817407] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 302.817659] dracut-initqueue[1065]: Warning: # #
[ 302.817876] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 302.818072] dracut-initqueue[1065]: Warning: # #
[ 302.818316] dracut-initqueue[1065]: Warning: Reason unknown
[ 302.818518] dracut-initqueue[1065]: Warning: # #
[ 302.818713] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 304.472900] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 304.474754] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 304.478069] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 304.481337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 304.485797] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 304.486437] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 304.486692] dracut-initqueue[1065]: Warning: # #
[ 304.486948] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 304.487155] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 304.487407] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 304.487608] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 304.487822] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 304.488076] dracut-initqueue[1065]: Warning: # #
[ 304.488281] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 304.488476] dracut-initqueue[1065]: Warning: # #
[ 304.488722] dracut-initqueue[1065]: Warning: Reason unknown
[ 304.488924] dracut-initqueue[1065]: Warning: # #
[ 304.489118] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 306.114080] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 306.115974] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 306.119279] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 306.122491] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 306.126987] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 306.127622] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 306.127876] dracut-initqueue[1065]: Warning: # #
[ 306.128132] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 306.128337] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 306.128587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 306.128790] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 306.128987] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 306.129237] dracut-initqueue[1065]: Warning: # #
[ 306.129463] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 306.129663] dracut-initqueue[1065]: Warning: # #
[ 306.129910] dracut-initqueue[1065]: Warning: Reason unknown
[ 306.130152] dracut-initqueue[1065]: Warning: # #
[ 306.130352] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 307.720270] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 307.722128] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 307.725404] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 307.728671] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 307.737559] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 307.738196] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 307.738452] dracut-initqueue[1065]: Warning: # #
[ 307.738708] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 307.738914] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 307.739164] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 307.739364] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 307.739566] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 307.739816] dracut-initqueue[1065]: Warning: # #
[ 307.740053] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 307.740256] dracut-initqueue[1065]: Warning: # #
[ 307.740502] dracut-initqueue[1065]: Warning: Reason unknown
[ 307.740704] dracut-initqueue[1065]: Warning: # #
[ 307.740899] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 309.455427] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 309.460184] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 309.466021] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 309.469202] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 309.473706] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 309.474338] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 309.474592] dracut-initqueue[1065]: Warning: # #
[ 309.474849] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 309.475055] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 309.475304] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 309.475507] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 309.475718] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 309.475968] dracut-initqueue[1065]: Warning: # #
[ 309.476172] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 309.476368] dracut-initqueue[1065]: Warning: # #
[ 309.476615] dracut-initqueue[1065]: Warning: Reason unknown
[ 309.476815] dracut-initqueue[1065]: Warning: # #
[ 309.477011] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 311.115553] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 311.117485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 311.120879] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 311.124146] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 311.128669] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 311.129319] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 311.129575] dracut-initqueue[1065]: Warning: # #
[ 311.129831] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 311.130080] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 311.130338] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 311.130540] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 311.130736] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 311.130986] dracut-initqueue[1065]: Warning: # #
[ 311.131212] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 311.131412] dracut-initqueue[1065]: Warning: # #
[ 311.131658] dracut-initqueue[1065]: Warning: Reason unknown
[ 311.131860] dracut-initqueue[1065]: Warning: # #
[ 311.132054] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 312.815414] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 312.817348] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 312.820654] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 312.823908] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 312.828420] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 312.829046] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 312.829300] dracut-initqueue[1065]: Warning: # #
[ 312.829556] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 312.829762] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 312.830055] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 312.830261] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 312.830457] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 312.830709] dracut-initqueue[1065]: Warning: # #
[ 312.830912] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 312.831107] dracut-initqueue[1065]: Warning: # #
[ 312.831350] dracut-initqueue[1065]: Warning: Reason unknown
[ 312.831551] dracut-initqueue[1065]: Warning: # #
[ 312.831745] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 314.515347] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 314.517196] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 314.520499] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 314.523767] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 314.528254] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 314.528913] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 314.529169] dracut-initqueue[1065]: Warning: # #
[ 314.529424] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 314.529630] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 314.529880] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 314.530121] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 314.530345] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 314.530618] dracut-initqueue[1065]: Warning: # #
[ 314.530824] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 314.531019] dracut-initqueue[1065]: Warning: # #
[ 314.531267] dracut-initqueue[1065]: Warning: Reason unknown
[ 314.531470] dracut-initqueue[1065]: Warning: # #
[ 314.531665] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 316.235393] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 316.240106] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 316.245987] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 316.249223] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 316.253718] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 316.254356] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 316.254608] dracut-initqueue[1065]: Warning: # #
[ 316.254861] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 316.255064] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 316.255333] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 316.255537] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 316.255732] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 316.256001] dracut-initqueue[1065]: Warning: # #
[ 316.256207] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 316.256402] dracut-initqueue[1065]: Warning: # #
[ 316.256648] dracut-initqueue[1065]: Warning: Reason unknown
[ 316.256849] dracut-initqueue[1065]: Warning: # #
[ 316.257058] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 317.965413] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 317.970186] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 317.975983] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 317.979170] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 317.983639] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 317.984286] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 317.984539] dracut-initqueue[1065]: Warning: # #
[ 317.984796] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 317.985002] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 317.985253] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 317.985456] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 317.985653] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 317.985903] dracut-initqueue[1065]: Warning: # #
[ 317.986126] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 317.986323] dracut-initqueue[1065]: Warning: # #
[ 317.986567] dracut-initqueue[1065]: Warning: Reason unknown
[ 317.986768] dracut-initqueue[1065]: Warning: # #
[ 317.986963] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 319.685353] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 319.690046] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 319.695825] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 319.698979] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 319.703442] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 319.704070] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 319.704327] dracut-initqueue[1065]: Warning: # #
[ 319.704580] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 319.704784] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 319.705036] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 319.705241] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 319.705436] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 319.705684] dracut-initqueue[1065]: Warning: # #
[ 319.705886] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 319.706081] dracut-initqueue[1065]: Warning: # #
[ 319.706327] dracut-initqueue[1065]: Warning: Reason unknown
[ 319.706530] dracut-initqueue[1065]: Warning: # #
[ 319.706726] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[2J[3J[-1;-1f[40m[2J[3J[-1;-1f[?25l[40m[-1;-1f[37m■ [33m■ [33m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[2J[3J[-1;-1f[49m[2J[3J[-1;-1f[?25h[2J[3J[-1;-1f[[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System.
[[0;32m OK [0m] Started [0;1;39mplymouth-start.ser…e[0m - Show Plymouth Boot Screen.
[[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo…uests to Plymouth Directory Watch.
[[0;32m OK [0m] Reached target [0;1;39mcryptsetup.…get[0m - Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mpaths.target[0m - Path Units.
[[0;32m OK [0m] Finished [0;1;39msystemd-udev-sett…To Complete Device Initialization.
Starting [0;1;39mmultipathd.servic…per Multipath Device Controller...
[[0;32m OK [0m] Started [0;1;39mmultipathd.service…apper Multipath Device Controller.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization.
[[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System.
[ 187.467377] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 187.469415] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 187.473337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 187.477200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 187.482582] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 187.483402] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 187.483737] dracut-initqueue[1065]: Warning: # #
[ 187.484054] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 187.484383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 187.484694] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 187.484961] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 187.485282] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 187.485524] dracut-initqueue[1065]: Warning: # #
[ 187.485841] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 187.486099] dracut-initqueue[1065]: Warning: # #
[ 187.486402] dracut-initqueue[1065]: Warning: Reason unknown
[ 187.486643] dracut-initqueue[1065]: Warning: # #
[ 187.486952] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 189.120808] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 189.122922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 189.126704] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 189.130485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 189.135624] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 189.136460] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 189.136784] dracut-initqueue[1065]: Warning: # #
[ 189.137103] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 189.137431] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 189.137739] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 189.137981] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 189.138307] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 189.138554] dracut-initqueue[1065]: Warning: # #
[ 189.138871] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 189.139109] dracut-initqueue[1065]: Warning: # #
[ 189.139419] dracut-initqueue[1065]: Warning: Reason unknown
[ 189.139664] dracut-initqueue[1065]: Warning: # #
[ 189.139973] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 190.741582] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 190.743676] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 190.747453] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 190.751245] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 190.756484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 190.757315] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 190.757637] dracut-initqueue[1065]: Warning: # #
[ 190.757958] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 190.758273] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 190.758587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 190.758833] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 190.759141] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 190.759385] dracut-initqueue[1065]: Warning: # #
[ 190.759695] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 190.759936] dracut-initqueue[1065]: Warning: # #
[ 190.760281] dracut-initqueue[1065]: Warning: Reason unknown
[ 190.760598] dracut-initqueue[1065]: Warning: # #
[ 190.760848] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 192.416393] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 192.418585] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 192.422449] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 192.426302] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 192.431598] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 192.432422] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 192.432740] dracut-initqueue[1065]: Warning: # #
[ 192.433056] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 192.433387] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 192.433697] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 192.433941] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 192.434256] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 192.434499] dracut-initqueue[1065]: Warning: # #
[ 192.434833] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 192.435066] dracut-initqueue[1065]: Warning: # #
[ 192.435370] dracut-initqueue[1065]: Warning: Reason unknown
[ 192.435612] dracut-initqueue[1065]: Warning: # #
[ 192.435921] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 194.075139] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 194.077330] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 194.081199] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 194.085001] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 194.090318] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 194.091144] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 194.091460] dracut-initqueue[1065]: Warning: # #
[ 194.091780] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 194.092141] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 194.092383] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 194.092691] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 194.092933] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 194.093243] dracut-initqueue[1065]: Warning: # #
[ 194.093487] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 194.093788] dracut-initqueue[1065]: Warning: # #
[ 194.094096] dracut-initqueue[1065]: Warning: Reason unknown
[ 194.094330] dracut-initqueue[1065]: Warning: # #
[ 194.094644] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 195.735657] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 195.737921] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 195.741729] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 195.745468] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 195.750745] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 195.751558] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 195.751885] dracut-initqueue[1065]: Warning: # #
[ 195.752199] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 195.752517] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 195.752835] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 195.753070] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 195.753378] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 195.753623] dracut-initqueue[1065]: Warning: # #
[ 195.753924] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 195.754160] dracut-initqueue[1065]: Warning: # #
[ 195.754473] dracut-initqueue[1065]: Warning: Reason unknown
[ 195.754787] dracut-initqueue[1065]: Warning: # #
[ 195.755035] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 197.375013] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 197.380454] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 197.387223] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 197.391096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 197.396315] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 197.397140] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 197.397462] dracut-initqueue[1065]: Warning: # #
[ 197.397773] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 197.398104] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 197.398412] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 197.398690] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 197.399014] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 197.399257] dracut-initqueue[1065]: Warning: # #
[ 197.399568] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 197.399802] dracut-initqueue[1065]: Warning: # #
[ 197.400160] dracut-initqueue[1065]: Warning: Reason unknown
[ 197.400409] dracut-initqueue[1065]: Warning: # #
[ 197.400717] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 199.054097] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 199.059331] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 199.066215] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 199.069994] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 199.075198] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 199.076011] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 199.076366] dracut-initqueue[1065]: Warning: # #
[ 199.076678] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 199.076997] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 199.077307] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 199.077541] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 199.077846] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 199.078088] dracut-initqueue[1065]: Warning: # #
[ 199.078421] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 199.078655] dracut-initqueue[1065]: Warning: # #
[ 199.078977] dracut-initqueue[1065]: Warning: Reason unknown
[ 199.079214] dracut-initqueue[1065]: Warning: # #
[ 199.079529] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 200.743971] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 200.749330] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 200.756144] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 200.759905] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 200.765129] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 200.765946] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 200.766276] dracut-initqueue[1065]: Warning: # #
[ 200.766594] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 200.766927] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 200.767238] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 200.767483] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 200.767787] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 200.768028] dracut-initqueue[1065]: Warning: # #
[ 200.768350] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 200.768591] dracut-initqueue[1065]: Warning: # #
[ 200.768889] dracut-initqueue[1065]: Warning: Reason unknown
[ 200.769209] dracut-initqueue[1065]: Warning: # #
[ 200.769451] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 202.374834] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 202.380261] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 202.387131] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 202.390987] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 202.396262] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 202.397087] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 202.397422] dracut-initqueue[1065]: Warning: # #
[ 202.397731] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 202.398048] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 202.398364] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 202.398607] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 202.398915] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 202.399161] dracut-initqueue[1065]: Warning: # #
[ 202.399482] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 202.399716] dracut-initqueue[1065]: Warning: # #
[ 202.400081] dracut-initqueue[1065]: Warning: Reason unknown
[ 202.400325] dracut-initqueue[1065]: Warning: # #
[ 202.400636] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 204.041916] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 204.047175] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 204.051066] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 204.057922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 204.063192] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 204.064019] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 204.064339] dracut-initqueue[1065]: Warning: # #
[ 204.064656] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 204.064980] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 204.065297] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 204.065540] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 204.065848] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 204.066095] dracut-initqueue[1065]: Warning: # #
[ 204.066440] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 204.066680] dracut-initqueue[1065]: Warning: # #
[ 204.066982] dracut-initqueue[1065]: Warning: Reason unknown
[ 204.067227] dracut-initqueue[1065]: Warning: # #
[ 204.067537] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 205.723901] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 205.729230] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 205.733120] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 205.736986] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 205.742307] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 205.743138] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 205.743463] dracut-initqueue[1065]: Warning: # #
[ 205.743781] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 205.744109] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 205.744426] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 205.744659] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 205.744969] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 205.745212] dracut-initqueue[1065]: Warning: # #
[ 205.745537] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 205.745778] dracut-initqueue[1065]: Warning: # #
[ 205.746084] dracut-initqueue[1065]: Warning: Reason unknown
[ 205.746393] dracut-initqueue[1065]: Warning: # #
[ 205.746634] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 207.370533] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 207.372632] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 207.376538] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 207.380474] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 207.390898] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 207.391717] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 207.392045] dracut-initqueue[1065]: Warning: # #
[ 207.392364] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 207.392679] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 207.392981] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 207.393288] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 207.393534] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 207.393841] dracut-initqueue[1065]: Warning: # #
[ 207.394105] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 207.394409] dracut-initqueue[1065]: Warning: # #
[ 207.394718] dracut-initqueue[1065]: Warning: Reason unknown
[ 207.394951] dracut-initqueue[1065]: Warning: # #
[ 207.395267] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 209.002753] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 209.004870] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 209.008716] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 209.012586] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 209.017877] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 209.018693] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 209.019015] dracut-initqueue[1065]: Warning: # #
[ 209.019334] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 209.019662] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 209.019983] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 209.020275] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 209.020586] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 209.020855] dracut-initqueue[1065]: Warning: # #
[ 209.021171] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 209.021419] dracut-initqueue[1065]: Warning: # #
[ 209.021728] dracut-initqueue[1065]: Warning: Reason unknown
[ 209.021985] dracut-initqueue[1065]: Warning: # #
[ 209.022294] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 210.643008] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 210.648273] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 210.652069] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 210.658894] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 210.664065] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 210.664892] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 210.665213] dracut-initqueue[1065]: Warning: # #
[ 210.665533] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 210.665903] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 210.666215] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 210.666449] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 210.666753] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 210.666997] dracut-initqueue[1065]: Warning: # #
[ 210.667319] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 210.667563] dracut-initqueue[1065]: Warning: # #
[ 210.667866] dracut-initqueue[1065]: Warning: Reason unknown
[ 210.668188] dracut-initqueue[1065]: Warning: # #
[ 210.668430] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 212.322824] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 212.328115] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 212.331924] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 212.338751] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 212.343960] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 212.344771] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 212.345113] dracut-initqueue[1065]: Warning: # #
[ 212.345433] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 212.345751] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 212.346057] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 212.346301] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 212.346614] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 212.346860] dracut-initqueue[1065]: Warning: # #
[ 212.347166] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 212.347401] dracut-initqueue[1065]: Warning: # #
[ 212.347704] dracut-initqueue[1065]: Warning: Reason unknown
[ 212.348015] dracut-initqueue[1065]: Warning: # #
[ 212.348262] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 214.026898] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 214.029034] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 214.032978] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 214.036816] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 214.042138] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 214.042943] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 214.043273] dracut-initqueue[1065]: Warning: # #
[ 214.043610] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 214.043921] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 214.044239] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 214.044480] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 214.044782] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 214.045024] dracut-initqueue[1065]: Warning: # #
[ 214.045330] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 214.045564] dracut-initqueue[1065]: Warning: # #
[ 214.045891] dracut-initqueue[1065]: Warning: Reason unknown
[ 214.046201] dracut-initqueue[1065]: Warning: # #
[ 214.046449] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 215.686310] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 215.688468] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 215.692386] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 215.696210] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 215.701484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 215.702308] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 215.702629] dracut-initqueue[1065]: Warning: # #
[ 215.702946] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 215.703311] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 215.703553] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 215.703858] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 215.704101] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 215.704412] dracut-initqueue[1065]: Warning: # #
[ 215.704656] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 215.704960] dracut-initqueue[1065]: Warning: # #
[ 215.705273] dracut-initqueue[1065]: Warning: Reason unknown
[ 215.705518] dracut-initqueue[1065]: Warning: # #
[ 215.705826] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 217.343157] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 217.345337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 217.349211] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 217.353051] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 217.358238] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 217.359059] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 217.359394] dracut-initqueue[1065]: Warning: # #
[ 217.359713] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 217.360099] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 217.360336] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 217.360640] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 217.360885] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 217.361190] dracut-initqueue[1065]: Warning: # #
[ 217.361431] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 217.361742] dracut-initqueue[1065]: Warning: # #
[ 217.362047] dracut-initqueue[1065]: Warning: Reason unknown
[ 217.362355] dracut-initqueue[1065]: Warning: # #
[ 217.362595] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 218.964365] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 218.969649] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 218.976406] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 218.980173] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 218.985361] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 218.986184] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 218.986514] dracut-initqueue[1065]: Warning: # #
[ 218.986840] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 218.987158] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 218.987470] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 218.987770] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 218.988105] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 218.988347] dracut-initqueue[1065]: Warning: # #
[ 218.988654] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 218.988913] dracut-initqueue[1065]: Warning: # #
[ 218.989224] dracut-initqueue[1065]: Warning: Reason unknown
[ 218.989467] dracut-initqueue[1065]: Warning: # #
[ 218.989793] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 220.612651] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 220.614774] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 220.618656] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 220.622474] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 220.627781] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 220.628606] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 220.628924] dracut-initqueue[1065]: Warning: # #
[ 220.629245] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 220.629579] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 220.629895] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 220.630184] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 220.630503] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 220.630749] dracut-initqueue[1065]: Warning: # #
[ 220.631062] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 220.631306] dracut-initqueue[1065]: Warning: # #
[ 220.631606] dracut-initqueue[1065]: Warning: Reason unknown
[ 220.631852] dracut-initqueue[1065]: Warning: # #
[ 220.632169] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 222.277601] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 222.279768] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 222.283571] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 222.287441] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 222.292759] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 222.293577] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 222.293895] dracut-initqueue[1065]: Warning: # #
[ 222.294217] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 222.294580] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 222.294823] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 222.295134] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 222.295372] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 222.295681] dracut-initqueue[1065]: Warning: # #
[ 222.295927] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 222.296229] dracut-initqueue[1065]: Warning: # #
[ 222.296536] dracut-initqueue[1065]: Warning: Reason unknown
[ 222.296845] dracut-initqueue[1065]: Warning: # #
[ 222.297093] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 223.952352] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 223.954575] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 223.958464] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 223.962325] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 223.967570] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 223.968377] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 223.968699] dracut-initqueue[1065]: Warning: # #
[ 223.969022] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 223.969354] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 223.969671] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 223.969916] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 223.970276] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 223.970525] dracut-initqueue[1065]: Warning: # #
[ 223.970838] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 223.971073] dracut-initqueue[1065]: Warning: # #
[ 223.971378] dracut-initqueue[1065]: Warning: Reason unknown
[ 223.971611] dracut-initqueue[1065]: Warning: # #
[ 223.971943] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 225.604452] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 225.609737] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 225.616635] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 225.620455] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 225.625632] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 225.626430] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 225.626751] dracut-initqueue[1065]: Warning: # #
[ 225.627071] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 225.627404] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 225.627710] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 225.627954] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 225.628266] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 225.628513] dracut-initqueue[1065]: Warning: # #
[ 225.628826] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 225.629060] dracut-initqueue[1065]: Warning: # #
[ 225.629362] dracut-initqueue[1065]: Warning: Reason unknown
[ 225.629667] dracut-initqueue[1065]: Warning: # #
[ 225.629915] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 227.344299] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 227.346522] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 227.350465] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 227.354277] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 227.359512] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 227.360394] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 227.360715] dracut-initqueue[1065]: Warning: # #
[ 227.361032] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 227.361378] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 227.361620] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 227.361925] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 227.362184] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 227.362499] dracut-initqueue[1065]: Warning: # #
[ 227.362742] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 227.363059] dracut-initqueue[1065]: Warning: # #
[ 227.363291] dracut-initqueue[1065]: Warning: Reason unknown
[ 227.363601] dracut-initqueue[1065]: Warning: # #
[ 227.363848] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 229.004196] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 229.006361] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 229.010282] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 229.014010] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 229.019275] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 229.020133] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 229.020457] dracut-initqueue[1065]: Warning: # #
[ 229.020775] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 229.021110] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 229.021418] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 229.021661] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 229.021971] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 229.022215] dracut-initqueue[1065]: Warning: # #
[ 229.022528] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 229.022776] dracut-initqueue[1065]: Warning: # #
[ 229.023077] dracut-initqueue[1065]: Warning: Reason unknown
[ 229.023310] dracut-initqueue[1065]: Warning: # #
[ 229.023639] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 230.665606] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 230.670751] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 230.674536] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 230.678242] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 230.683535] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 230.684366] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 230.684685] dracut-initqueue[1065]: Warning: # #
[ 230.685006] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 230.685342] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 230.685652] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 230.685896] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 230.686207] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 230.686452] dracut-initqueue[1065]: Warning: # #
[ 230.686783] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 230.687032] dracut-initqueue[1065]: Warning: # #
[ 230.687333] dracut-initqueue[1065]: Warning: Reason unknown
[ 230.687577] dracut-initqueue[1065]: Warning: # #
[ 230.687886] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 232.342970] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 232.348301] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 232.352173] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 232.358965] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 232.364184] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 232.365000] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 232.365320] dracut-initqueue[1065]: Warning: # #
[ 232.365638] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 232.366005] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 232.366249] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 232.366560] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 232.366798] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 232.367105] dracut-initqueue[1065]: Warning: # #
[ 232.367353] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 232.367667] dracut-initqueue[1065]: Warning: # #
[ 232.367973] dracut-initqueue[1065]: Warning: Reason unknown
[ 232.368281] dracut-initqueue[1065]: Warning: # #
[ 232.368520] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 234.080263] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 234.085491] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 234.089318] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 234.093200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 234.098426] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 234.099251] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 234.099568] dracut-initqueue[1065]: Warning: # #
[ 234.099892] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 234.100264] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 234.100577] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 234.100821] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 234.101134] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 234.101378] dracut-initqueue[1065]: Warning: # #
[ 234.101695] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 234.101958] dracut-initqueue[1065]: Warning: # #
[ 234.102276] dracut-initqueue[1065]: Warning: Reason unknown
[ 234.102522] dracut-initqueue[1065]: Warning: # #
[ 234.102837] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 235.806091] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 235.808244] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 235.812122] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 235.815961] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 235.821286] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 235.822099] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 235.822418] dracut-initqueue[1065]: Warning: # #
[ 235.822734] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 235.823049] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 235.823358] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 235.823601] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 235.823911] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 235.824155] dracut-initqueue[1065]: Warning: # #
[ 235.824475] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 235.824711] dracut-initqueue[1065]: Warning: # #
[ 235.825014] dracut-initqueue[1065]: Warning: Reason unknown
[ 235.825320] dracut-initqueue[1065]: Warning: # #
[ 235.825567] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 237.468730] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 237.474032] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 237.477853] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 237.481594] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 237.486746] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 237.487564] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 237.487883] dracut-initqueue[1065]: Warning: # #
[ 237.488198] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 237.488516] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 237.488824] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 237.489130] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 237.489374] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 237.489682] dracut-initqueue[1065]: Warning: # #
[ 237.489929] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 237.490289] dracut-initqueue[1065]: Warning: # #
[ 237.490599] dracut-initqueue[1065]: Warning: Reason unknown
[ 237.490832] dracut-initqueue[1065]: Warning: # #
[ 237.491142] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 239.164220] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 239.169577] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 239.176482] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 239.180275] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 239.185473] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 239.186293] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 239.186613] dracut-initqueue[1065]: Warning: # #
[ 239.186927] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 239.187245] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 239.187578] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 239.187813] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 239.188119] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 239.188364] dracut-initqueue[1065]: Warning: # #
[ 239.188692] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 239.188930] dracut-initqueue[1065]: Warning: # #
[ 239.189235] dracut-initqueue[1065]: Warning: Reason unknown
[ 239.189467] dracut-initqueue[1065]: Warning: # #
[ 239.189778] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 240.846470] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 240.848645] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 240.852501] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 240.856375] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 240.861720] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 240.862531] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 240.862851] dracut-initqueue[1065]: Warning: # #
[ 240.863171] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 240.863481] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 240.863791] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 240.864035] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 240.864351] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 240.864596] dracut-initqueue[1065]: Warning: # #
[ 240.864911] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 240.865147] dracut-initqueue[1065]: Warning: # #
[ 240.865454] dracut-initqueue[1065]: Warning: Reason unknown
[ 240.865686] dracut-initqueue[1065]: Warning: # #
[ 240.865997] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 242.554739] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 242.560096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 242.566913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 242.570700] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 242.575926] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 242.576729] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 242.577049] dracut-initqueue[1065]: Warning: # #
[ 242.577368] dracut-initqueue[1065]: Warning: It see[ 339.187385] random: crng init done
ms that the boot has failed. Possible causes include
[ 242.577706] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 242.578014] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 242.578258] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 242.578572] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 242.578817] dracut-initqueue[1065]: Warning: # #
[ 242.579149] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 242.579388] dracut-initqueue[1065]: Warning: # #
[ 242.579695] dracut-initqueue[1065]: Warning: Reason unknown
[ 242.579941] dracut-initqueue[1065]: Warning: # #
[ 242.580285] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 244.236452] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 244.241849] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 244.248652] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 244.252469] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 244.257715] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 244.258538] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 244.258859] dracut-initqueue[1065]: Warning: # #
[ 244.259167] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 244.259479] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 244.259818] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 244.260102] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 244.260415] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 244.260661] dracut-initqueue[1065]: Warning: # #
[ 244.260982] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 244.261218] dracut-initqueue[1065]: Warning: # #
[ 244.261522] dracut-initqueue[1065]: Warning: Reason unknown
[ 244.261754] dracut-initqueue[1065]: Warning: # #
[ 244.262067] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 245.938665] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 245.943877] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 245.947683] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 245.951595] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 245.956816] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 245.957647] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 245.957974] dracut-initqueue[1065]: Warning: # #
[ 245.958296] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 245.958632] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 245.958951] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 245.959195] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 245.959504] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 245.959749] dracut-initqueue[1065]: Warning: # #
[ 245.960130] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 245.960378] dracut-initqueue[1065]: Warning: # #
[ 245.960687] dracut-initqueue[1065]: Warning: Reason unknown
[ 245.960925] dracut-initqueue[1065]: Warning: # #
[ 245.961234] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 247.618170] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 247.623607] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 247.627437] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 247.631352] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 247.636590] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 247.637417] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 247.637737] dracut-initqueue[1065]: Warning: # #
[ 247.638049] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 247.638374] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 247.638682] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 247.638926] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 247.639232] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 247.639475] dracut-initqueue[1065]: Warning: # #
[ 247.639790] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 247.640080] dracut-initqueue[1065]: Warning: # #
[ 247.640385] dracut-initqueue[1065]: Warning: Reason unknown
[ 247.640699] dracut-initqueue[1065]: Warning: # #
[ 247.640946] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 249.332644] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 249.337971] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 249.344788] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 249.348497] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 249.353794] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 249.354606] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 249.354928] dracut-initqueue[1065]: Warning: # #
[ 249.355239] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 249.355557] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 249.355896] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 249.356138] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 249.356451] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 249.356695] dracut-initqueue[1065]: Warning: # #
[ 249.357003] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 249.357239] dracut-initqueue[1065]: Warning: # #
[ 249.357549] dracut-initqueue[1065]: Warning: Reason unknown
[ 249.357781] dracut-initqueue[1065]: Warning: # #
[ 249.358084] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 250.997662] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 251.003096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 251.009863] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 251.013636] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 251.018838] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 251.019668] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 251.019996] dracut-initqueue[1065]: Warning: # #
[ 251.020362] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 251.020679] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 251.021006] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 251.021241] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 251.021543] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 251.021785] dracut-initqueue[1065]: Warning: # #
[ 251.022089] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 251.022325] dracut-initqueue[1065]: Warning: # #
[ 251.022632] dracut-initqueue[1065]: Warning: Reason unknown
[ 251.022960] dracut-initqueue[1065]: Warning: # #
[ 251.023201] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 252.644254] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 252.649481] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 252.656275] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 252.662982] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 252.668141] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 252.668965] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 252.669285] dracut-initqueue[1065]: Warning: # #
[ 252.669597] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 252.669910] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 252.670280] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 252.670546] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 252.670869] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 252.671116] dracut-initqueue[1065]: Warning: # #
[ 252.671435] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 252.671679] dracut-initqueue[1065]: Warning: # #
[ 252.671979] dracut-initqueue[1065]: Warning: Reason unknown
[ 252.672226] dracut-initqueue[1065]: Warning: # #
[ 252.672534] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 254.292604] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 254.294799] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 254.298687] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 254.302566] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 254.307845] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 254.308670] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 254.308993] dracut-initqueue[1065]: Warning: # #
[ 254.309307] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 254.309626] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 254.309947] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 254.310227] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 254.310538] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 254.310782] dracut-initqueue[1065]: Warning: # #
[ 254.311087] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 254.311323] dracut-initqueue[1065]: Warning: # #
[ 254.311628] dracut-initqueue[1065]: Warning: Reason unknown
[ 254.311955] dracut-initqueue[1065]: Warning: # #
[ 254.312198] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 255.946754] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 255.948840] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 255.952746] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 255.956589] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 255.961857] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 255.962672] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 255.962994] dracut-initqueue[1065]: Warning: # #
[ 255.963313] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 255.963628] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 255.963937] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 255.964182] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 255.964500] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 255.964742] dracut-initqueue[1065]: Warning: # #
[ 255.965057] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 255.965317] dracut-initqueue[1065]: Warning: # #
[ 255.965624] dracut-initqueue[1065]: Warning: Reason unknown
[ 255.965869] dracut-initqueue[1065]: Warning: # #
[ 255.966177] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 257.588621] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 257.590771] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 257.594645] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 257.598442] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 257.603721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 257.604547] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 257.604867] dracut-initqueue[1065]: Warning: # #
[ 257.605175] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 257.605487] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 257.605805] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 257.606039] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 257.606345] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 257.606589] dracut-initqueue[1065]: Warning: # #
[ 257.606901] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 257.607137] dracut-initqueue[1065]: Warning: # #
[ 257.607453] dracut-initqueue[1065]: Warning: Reason unknown
[ 257.607764] dracut-initqueue[1065]: Warning: # #
[ 257.608013] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 259.266369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 259.268556] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 259.272439] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 259.276278] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 259.281538] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 259.282374] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 259.282702] dracut-initqueue[1065]: Warning: # #
[ 259.283024] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 259.283357] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 259.283676] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 259.283917] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 259.284235] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 259.284478] dracut-initqueue[1065]: Warning: # #
[ 259.284802] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 259.285042] dracut-initqueue[1065]: Warning: # #
[ 259.285351] dracut-initqueue[1065]: Warning: Reason unknown
[ 259.285595] dracut-initqueue[1065]: Warning: # #
[ 259.285903] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 260.891775] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 260.896966] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 260.903767] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 260.907473] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 260.912757] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 260.913573] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 260.913892] dracut-initqueue[1065]: Warning: # #
[ 260.914202] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 260.914512] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 260.914833] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 260.915068] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 260.915375] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 260.915618] dracut-initqueue[1065]: Warning: # #
[ 260.915929] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 260.916187] dracut-initqueue[1065]: Warning: # #
[ 260.916494] dracut-initqueue[1065]: Warning: Reason unknown
[ 260.916804] dracut-initqueue[1065]: Warning: # #
[ 260.917053] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 262.555168] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 262.560542] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 262.567336] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 262.571179] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 262.576441] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 262.577247] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 262.577567] dracut-initqueue[1065]: Warning: # #
[ 262.577875] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 262.578187] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 262.578502] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 262.578738] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 262.579051] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 262.579294] dracut-initqueue[1065]: Warning: # #
[ 262.579610] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 262.579854] dracut-initqueue[1065]: Warning: # #
[ 262.580203] dracut-initqueue[1065]: Warning: Reason unknown
[ 262.580522] dracut-initqueue[1065]: Warning: # #
[ 262.580766] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 264.238334] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 264.243663] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 264.250459] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 264.254303] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 264.259537] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 264.260400] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 264.260724] dracut-initqueue[1065]: Warning: # #
[ 264.261043] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 264.261357] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 264.261667] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 264.261912] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 264.262222] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 264.262469] dracut-initqueue[1065]: Warning: # #
[ 264.262773] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 264.263008] dracut-initqueue[1065]: Warning: # #
[ 264.263318] dracut-initqueue[1065]: Warning: Reason unknown
[ 264.263552] dracut-initqueue[1065]: Warning: # #
[ 264.263867] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 265.953439] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 265.958743] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 265.962556] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 265.969446] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 265.974651] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 265.975473] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 265.975797] dracut-initqueue[1065]: Warning: # #
[ 265.976110] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 265.976436] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 265.976742] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 265.976988] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 265.977293] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 265.977540] dracut-initqueue[1065]: Warning: # #
[ 265.977868] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 265.978114] dracut-initqueue[1065]: Warning: # #
[ 265.978416] dracut-initqueue[1065]: Warning: Reason unknown
[ 265.978658] dracut-initqueue[1065]: Warning: # #
[ 265.978967] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 267.668896] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 267.671082] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 267.674937] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 267.678842] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 267.689063] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 267.689885] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 267.690243] dracut-initqueue[1065]: Warning: # #
[ 267.690557] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 267.690881] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 267.691194] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 267.691437] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 267.691744] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 267.691991] dracut-initqueue[1065]: Warning: # #
[ 267.692301] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 267.692535] dracut-initqueue[1065]: Warning: # #
[ 267.692845] dracut-initqueue[1065]: Warning: Reason unknown
[ 267.693079] dracut-initqueue[1065]: Warning: # #
[ 267.693392] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 269.295339] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 269.300736] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 269.307493] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 269.314260] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 269.319414] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 269.320289] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 269.320611] dracut-initqueue[1065]: Warning: # #
[ 269.320928] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 269.321250] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 269.321587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 269.321829] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 269.322167] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 269.322410] dracut-initqueue[1065]: Warning: # #
[ 269.322718] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 269.322952] dracut-initqueue[1065]: Warning: # #
[ 269.323263] dracut-initqueue[1065]: Warning: Reason unknown
[ 269.323577] dracut-initqueue[1065]: Warning: # #
[ 269.323889] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 270.945427] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 270.950764] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 270.957524] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 270.961306] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 270.966544] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 270.967434] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 270.967758] dracut-initqueue[1065]: Warning: # #
[ 270.968076] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 270.968394] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 270.968696] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 270.969011] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 270.969256] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 270.969571] dracut-initqueue[1065]: Warning: # #
[ 270.969835] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 270.970190] dracut-initqueue[1065]: Warning: # #
[ 270.970433] dracut-initqueue[1065]: Warning: Reason unknown
[ 270.970738] dracut-initqueue[1065]: Warning: # #
[ 270.970990] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 272.623103] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 272.628383] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 272.632183] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 272.639011] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 272.644224] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 272.645048] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 272.645380] dracut-initqueue[1065]: Warning: # #
[ 272.645735] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 272.646073] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 272.646404] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 272.646719] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 272.646954] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 272.647268] dracut-initqueue[1065]: Warning: # #
[ 272.647532] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 272.647837] dracut-initqueue[1065]: Warning: # #
[ 272.648142] dracut-initqueue[1065]: Warning: Reason unknown
[ 272.648387] dracut-initqueue[1065]: Warning: # #
[ 272.648697] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 274.283732] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 274.285923] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 274.289781] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 274.293769] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 274.299014] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 274.299839] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 274.300188] dracut-initqueue[1065]: Warning: # #
[ 274.300507] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 274.300818] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 274.301145] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 274.301377] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 274.301687] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 274.301930] dracut-initqueue[1065]: Warning: # #
[ 274.302238] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 274.302477] dracut-initqueue[1065]: Warning: # #
[ 274.302778] dracut-initqueue[1065]: Warning: Reason unknown
[ 274.303086] dracut-initqueue[1065]: Warning: # #
[ 274.303333] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 275.973351] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 275.975534] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 275.979411] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 275.983288] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 275.988545] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 275.989375] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 275.989692] dracut-initqueue[1065]: Warning: # #
[ 275.990043] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 275.990405] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 275.990742] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 275.990989] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 275.991292] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 275.991537] dracut-initqueue[1065]: Warning: # #
[ 275.991866] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 275.992104] dracut-initqueue[1065]: Warning: # #
[ 275.992413] dracut-initqueue[1065]: Warning: Reason unknown
[ 275.992659] dracut-initqueue[1065]: Warning: # #
[ 275.992962] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 277.684245] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 277.689608] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 277.696499] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 277.700334] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 277.705620] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 277.706431] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 277.706744] dracut-initqueue[1065]: Warning: # #
[ 277.707060] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 277.707372] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 277.707677] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 277.707990] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 277.708229] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 277.708536] dracut-initqueue[1065]: Warning: # #
[ 277.708781] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 277.709103] dracut-initqueue[1065]: Warning: # #
[ 277.709413] dracut-initqueue[1065]: Warning: Reason unknown
[ 277.709661] dracut-initqueue[1065]: Warning: # #
[ 277.709969] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 279.384490] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 279.389773] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 279.396604] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 279.400449] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 279.405670] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 279.406479] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 279.406795] dracut-initqueue[1065]: Warning: # #
[ 279.407113] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 279.407423] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 279.407737] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 279.407972] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 279.408275] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 279.408519] dracut-initqueue[1065]: Warning: # #
[ 279.408829] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 279.409072] dracut-initqueue[1065]: Warning: # #
[ 279.409376] dracut-initqueue[1065]: Warning: Reason unknown
[ 279.409688] dracut-initqueue[1065]: Warning: # #
[ 279.409934] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 281.052057] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 281.057253] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 281.061139] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 281.067915] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 281.073334] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 281.074150] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 281.074467] dracut-initqueue[1065]: Warning: # #
[ 281.074785] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 281.075111] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 281.075424] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 281.075666] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 281.075970] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 281.076215] dracut-initqueue[1065]: Warning: # #
[ 281.076525] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 281.076765] dracut-initqueue[1065]: Warning: # #
[ 281.077071] dracut-initqueue[1065]: Warning: Reason unknown
[ 281.077303] dracut-initqueue[1065]: Warning: # #
[ 281.077614] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 282.768510] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 282.770706] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 282.774567] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 282.778446] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 282.783723] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 282.784530] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 282.784864] dracut-initqueue[1065]: Warning: # #
[ 282.785173] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 282.785485] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 282.785801] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 282.786060] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 282.786374] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 282.786620] dracut-initqueue[1065]: Warning: # #
[ 282.786933] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 282.787176] dracut-initqueue[1065]: Warning: # #
[ 282.787477] dracut-initqueue[1065]: Warning: Reason unknown
[ 282.787722] dracut-initqueue[1065]: Warning: # #
[ 282.788030] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 284.409074] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 284.411209] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 284.415090] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 284.418885] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 284.429249] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 284.430087] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 284.430410] dracut-initqueue[1065]: Warning: # #
[ 284.430731] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 284.431052] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 284.431365] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 284.431676] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 284.432013] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 284.432253] dracut-initqueue[1065]: Warning: # #
[ 284.432564] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 284.432810] dracut-initqueue[1065]: Warning: # #
[ 284.433120] dracut-initqueue[1065]: Warning: Reason unknown
[ 284.433380] dracut-initqueue[1065]: Warning: # #
[ 284.433685] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 286.053659] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 286.059036] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 286.062920] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 286.069773] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 286.080102] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 286.080928] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 286.081240] dracut-initqueue[1065]: Warning: # #
[ 286.081558] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 286.081874] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 286.082189] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 286.082454] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 286.082771] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 286.083015] dracut-initqueue[1065]: Warning: # #
[ 286.083345] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 286.083593] dracut-initqueue[1065]: Warning: # #
[ 286.083893] dracut-initqueue[1065]: Warning: Reason unknown
[ 286.084130] dracut-initqueue[1065]: Warning: # #
[ 286.084438] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 287.723369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 287.728739] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 287.735577] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 287.739334] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 287.744498] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 287.745319] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 287.745633] dracut-initqueue[1065]: Warning: # #
[ 287.745944] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 287.746271] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 287.746587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 287.746828] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 287.747134] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 287.747378] dracut-initqueue[1065]: Warning: # #
[ 287.747687] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 287.747919] dracut-initqueue[1065]: Warning: # #
[ 287.748220] dracut-initqueue[1065]: Warning: Reason unknown
[ 287.748536] dracut-initqueue[1065]: Warning: # #
[ 287.748781] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 289.426418] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 289.431709] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 289.435490] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 289.439282] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 289.444574] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 289.445401] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 289.445712] dracut-initqueue[1065]: Warning: # #
[ 289.446027] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 289.446339] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 289.446651] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 289.446887] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 289.447190] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 289.447433] dracut-initqueue[1065]: Warning: # #
[ 289.447741] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 289.447981] dracut-initqueue[1065]: Warning: # #
[ 289.448285] dracut-initqueue[1065]: Warning: Reason unknown
[ 289.448592] dracut-initqueue[1065]: Warning: # #
[ 289.448840] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 291.089534] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 291.094826] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 291.098647] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 291.102493] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 291.107727] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 291.108562] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 291.108891] dracut-initqueue[1065]: Warning: # #
[ 291.109234] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 291.109596] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 291.109918] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 291.110277] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 291.110523] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 291.110830] dracut-initqueue[1065]: Warning: # #
[ 291.111090] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 291.111394] dracut-initqueue[1065]: Warning: # #
[ 291.111702] dracut-initqueue[1065]: Warning: Reason unknown
[ 291.111945] dracut-initqueue[1065]: Warning: # #
[ 291.112254] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 292.763231] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 292.768506] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 292.772348] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 292.779191] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 292.784423] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 292.785241] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 292.785556] dracut-initqueue[1065]: Warning: # #
[ 292.785873] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 292.786184] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 292.786501] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 292.786735] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 292.787038] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 292.787282] dracut-initqueue[1065]: Warning: # #
[ 292.787618] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 292.787866] dracut-initqueue[1065]: Warning: # #
[ 292.788225] dracut-initqueue[1065]: Warning: Reason unknown
[ 292.788564] dracut-initqueue[1065]: Warning: # #
[ 292.788871] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 294.479263] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 294.484514] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 294.488349] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 294.492188] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 294.497485] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 294.498303] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 294.498621] dracut-initqueue[1065]: Warning: # #
[ 294.498932] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 294.499249] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 294.499556] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 294.499793] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 294.500153] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 294.500397] dracut-initqueue[1065]: Warning: # #
[ 294.500710] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 294.500951] dracut-initqueue[1065]: Warning: # #
[ 294.501252] dracut-initqueue[1065]: Warning: Reason unknown
[ 294.501497] dracut-initqueue[1065]: Warning: # #
[ 294.501803] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 296.185429] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 296.190646] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 296.193887] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 296.197062] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 296.201641] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 296.202268] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 296.202523] dracut-initqueue[1065]: Warning: # #
[ 296.202779] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 296.202986] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 296.203237] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 296.203437] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 296.203645] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 296.203896] dracut-initqueue[1065]: Warning: # #
[ 296.204122] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 296.204322] dracut-initqueue[1065]: Warning: # #
[ 296.204569] dracut-initqueue[1065]: Warning: Reason unknown
[ 296.204772] dracut-initqueue[1065]: Warning: # #
[ 296.204968] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 297.905351] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 297.907231] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 297.910596] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 297.913886] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 297.918340] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 297.918987] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 297.919240] dracut-initqueue[1065]: Warning: # #
[ 297.919497] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 297.919704] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 297.919954] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 297.920199] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 297.920398] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 297.920650] dracut-initqueue[1065]: Warning: # #
[ 297.920855] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 297.921051] dracut-initqueue[1065]: Warning: # #
[ 297.921297] dracut-initqueue[1065]: Warning: Reason unknown
[ 297.921500] dracut-initqueue[1065]: Warning: # #
[ 297.921695] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 299.526331] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 299.531065] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 299.534319] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 299.537554] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 299.542075] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 299.542727] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 299.542983] dracut-initqueue[1065]: Warning: # #
[ 299.543241] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 299.543448] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 299.543699] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 299.543901] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 299.544096] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 299.544348] dracut-initqueue[1065]: Warning: # #
[ 299.544567] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 299.544763] dracut-initqueue[1065]: Warning: # #
[ 299.545008] dracut-initqueue[1065]: Warning: Reason unknown
[ 299.545211] dracut-initqueue[1065]: Warning: # #
[ 299.545407] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 301.136918] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 301.141715] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 301.144909] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 301.148142] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 301.152644] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 301.153294] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 301.153549] dracut-initqueue[1065]: Warning: # #
[ 301.153807] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 301.154015] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 301.154268] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 301.154469] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 301.154663] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 301.154914] dracut-initqueue[1065]: Warning: # #
[ 301.155161] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 301.155361] dracut-initqueue[1065]: Warning: # #
[ 301.155609] dracut-initqueue[1065]: Warning: Reason unknown
[ 301.155814] dracut-initqueue[1065]: Warning: # #
[ 301.156009] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 302.800129] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 302.804654] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 302.807825] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 302.810990] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 302.815384] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 302.816018] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 302.816271] dracut-initqueue[1065]: Warning: # #
[ 302.816526] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 302.816733] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 302.816984] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 302.817207] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 302.817407] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 302.817659] dracut-initqueue[1065]: Warning: # #
[ 302.817876] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 302.818072] dracut-initqueue[1065]: Warning: # #
[ 302.818316] dracut-initqueue[1065]: Warning: Reason unknown
[ 302.818518] dracut-initqueue[1065]: Warning: # #
[ 302.818713] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 304.472900] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 304.474754] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 304.478069] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 304.481337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 304.485797] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 304.486437] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 304.486692] dracut-initqueue[1065]: Warning: # #
[ 304.486948] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 304.487155] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 304.487407] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 304.487608] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 304.487822] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 304.488076] dracut-initqueue[1065]: Warning: # #
[ 304.488281] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 304.488476] dracut-initqueue[1065]: Warning: # #
[ 304.488722] dracut-initqueue[1065]: Warning: Reason unknown
[ 304.488924] dracut-initqueue[1065]: Warning: # #
[ 304.489118] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 306.114080] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 306.115974] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 306.119279] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 306.122491] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 306.126987] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 306.127622] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 306.127876] dracut-initqueue[1065]: Warning: # #
[ 306.128132] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 306.128337] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 306.128587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 306.128790] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 306.128987] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 306.129237] dracut-initqueue[1065]: Warning: # #
[ 306.129463] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 306.129663] dracut-initqueue[1065]: Warning: # #
[ 306.129910] dracut-initqueue[1065]: Warning: Reason unknown
[ 306.130152] dracut-initqueue[1065]: Warning: # #
[ 306.130352] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 307.720270] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 307.722128] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 307.725404] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 307.728671] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 307.737559] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 307.738196] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 307.738452] dracut-initqueue[1065]: Warning: # #
[ 307.738708] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 307.738914] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 307.739164] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 307.739364] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 307.739566] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 307.739816] dracut-initqueue[1065]: Warning: # #
[ 307.740053] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 307.740256] dracut-initqueue[1065]: Warning: # #
[ 307.740502] dracut-initqueue[1065]: Warning: Reason unknown
[ 307.740704] dracut-initqueue[1065]: Warning: # #
[ 307.740899] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 309.455427] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 309.460184] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 309.466021] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 309.469202] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 309.473706] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 309.474338] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 309.474592] dracut-initqueue[1065]: Warning: # #
[ 309.474849] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 309.475055] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 309.475304] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 309.475507] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 309.475718] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 309.475968] dracut-initqueue[1065]: Warning: # #
[ 309.476172] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 309.476368] dracut-initqueue[1065]: Warning: # #
[ 309.476615] dracut-initqueue[1065]: Warning: Reason unknown
[ 309.476815] dracut-initqueue[1065]: Warning: # #
[ 309.477011] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 311.115553] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 311.117485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 311.120879] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 311.124146] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 311.128669] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 311.129319] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 311.129575] dracut-initqueue[1065]: Warning: # #
[ 311.129831] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 311.130080] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 311.130338] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 311.130540] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 311.130736] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 311.130986] dracut-initqueue[1065]: Warning: # #
[ 311.131212] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 311.131412] dracut-initqueue[1065]: Warning: # #
[ 311.131658] dracut-initqueue[1065]: Warning: Reason unknown
[ 311.131860] dracut-initqueue[1065]: Warning: # #
[ 311.132054] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 312.815414] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 312.817348] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 312.820654] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 312.823908] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 312.828420] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 312.829046] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 312.829300] dracut-initqueue[1065]: Warning: # #
[ 312.829556] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 312.829762] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 312.830055] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 312.830261] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 312.830457] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 312.830709] dracut-initqueue[1065]: Warning: # #
[ 312.830912] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 312.831107] dracut-initqueue[1065]: Warning: # #
[ 312.831350] dracut-initqueue[1065]: Warning: Reason unknown
[ 312.831551] dracut-initqueue[1065]: Warning: # #
[ 312.831745] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 314.515347] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 314.517196] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 314.520499] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 314.523767] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 314.528254] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 314.528913] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 314.529169] dracut-initqueue[1065]: Warning: # #
[ 314.529424] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 314.529630] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 314.529880] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 314.530121] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 314.530345] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 314.530618] dracut-initqueue[1065]: Warning: # #
[ 314.530824] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 314.531019] dracut-initqueue[1065]: Warning: # #
[ 314.531267] dracut-initqueue[1065]: Warning: Reason unknown
[ 314.531470] dracut-initqueue[1065]: Warning: # #
[ 314.531665] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 316.235393] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 316.240106] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 316.245987] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 316.249223] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 316.253718] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 316.254356] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 316.254608] dracut-initqueue[1065]: Warning: # #
[ 316.254861] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 316.255064] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 316.255333] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 316.255537] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 316.255732] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 316.256001] dracut-initqueue[1065]: Warning: # #
[ 316.256207] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 316.256402] dracut-initqueue[1065]: Warning: # #
[ 316.256648] dracut-initqueue[1065]: Warning: Reason unknown
[ 316.256849] dracut-initqueue[1065]: Warning: # #
[ 316.257058] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 317.965413] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 317.970186] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 317.975983] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 317.979170] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 317.983639] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 317.984286] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 317.984539] dracut-initqueue[1065]: Warning: # #
[ 317.984796] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 317.985002] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 317.985253] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 317.985456] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 317.985653] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 317.985903] dracut-initqueue[1065]: Warning: # #
[ 317.986126] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 317.986323] dracut-initqueue[1065]: Warning: # #
[ 317.986567] dracut-initqueue[1065]: Warning: Reason unknown
[ 317.986768] dracut-initqueue[1065]: Warning: # #
[ 317.986963] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 319.685353] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 319.690046] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 319.695825] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 319.698979] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 319.703442] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 319.704070] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 319.704327] dracut-initqueue[1065]: Warning: # #
[ 319.704580] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 319.704784] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 319.705036] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 319.705241] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 319.705436] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 319.705684] dracut-initqueue[1065]: Warning: # #
[ 319.705886] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 319.706081] dracut-initqueue[1065]: Warning: # #
[ 319.706327] dracut-initqueue[1065]: Warning: Reason unknown
[ 319.706530] dracut-initqueue[1065]: Warning: # #
[ 319.706726] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 321.394696] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 321.396611] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 321.399913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 321.403233] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 321.407721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 321.408336] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 321.408590] dracut-initqueue[1065]: Warning: # #
[ 321.408843] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 321.409045] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 321.409296] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 321.409499] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 321.409693] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 321.409961] dracut-initqueue[1065]: Warning: # #
[ 321.410200] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 321.410399] dracut-initqueue[1065]: Warning: # #
[ 321.410647] dracut-initqueue[1065]: Warning: Reason unknown
[ 321.410851] dracut-initqueue[1065]: Warning: # #
[ 321.411045] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 323.095132] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 323.096970] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 323.100347] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 323.103585] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 323.108052] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 323.108683] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 323.108938] dracut-initqueue[1065]: Warning: # #
[ 323.109190] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 323.109393] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 323.109647] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 323.109850] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 323.110085] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 323.110339] dracut-initqueue[1065]: Warning: # #
[ 323.110542] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 323.110739] dracut-initqueue[1065]: Warning: # #
[ 323.110985] dracut-initqueue[1065]: Warning: Reason unknown
[ 323.111189] dracut-initqueue[1065]: Warning: # #
[ 323.111384] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 324.795341] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 324.797286] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 324.800608] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 324.803909] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 324.808391] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 324.809040] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 324.809295] dracut-initqueue[1065]: Warning: # #
[ 324.809546] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 324.809748] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 324.810000] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 324.810247] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 324.810444] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 324.810692] dracut-initqueue[1065]: Warning: # #
[ 324.810898] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 324.811094] dracut-initqueue[1065]: Warning: # #
[ 324.811339] dracut-initqueue[1065]: Warning: Reason unknown
[ 324.811542] dracut-initqueue[1065]: Warning: # #
[ 324.811737] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 326.418639] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 326.423378] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 326.426610] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 326.429870] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 326.438731] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 326.439356] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 326.439613] dracut-initqueue[1065]: Warning: # #
[ 326.439865] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 326.440103] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 326.440362] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 326.440566] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 326.440760] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 326.441027] dracut-initqueue[1065]: Warning: # #
[ 326.441232] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 326.441427] dracut-initqueue[1065]: Warning: # #
[ 326.441673] dracut-initqueue[1065]: Warning: Reason unknown
[ 326.441876] dracut-initqueue[1065]: Warning: # #
[ 326.442071] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 328.205369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 328.207220] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 328.210547] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 328.213777] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 328.218234] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 328.218883] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 328.219139] dracut-initqueue[1065]: Warning: # #
[ 328.219393] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 328.219596] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 328.219844] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 328.220085] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 328.220289] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 328.220539] dracut-initqueue[1065]: Warning: # #
[ 328.220741] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 328.220936] dracut-initqueue[1065]: Warning: # #
[ 328.221183] dracut-initqueue[1065]: Warning: Reason unknown
[ 328.221385] dracut-initqueue[1065]: Warning: # #
[ 328.221580] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 329.905124] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 329.907030] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 329.910379] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 329.913586] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 329.922526] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 329.923150] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 329.923405] dracut-initqueue[1065]: Warning: # #
[ 329.923660] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 329.923863] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 329.924115] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 329.924318] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 329.924513] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 329.924760] dracut-initqueue[1065]: Warning: # #
[ 329.924963] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 329.925159] dracut-initqueue[1065]: Warning: # #
[ 329.925404] dracut-initqueue[1065]: Warning: Reason unknown
[ 329.925606] dracut-initqueue[1065]: Warning: # #
[ 329.925803] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 331.627850] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 331.629826] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 331.633168] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 331.636478] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 331.645516] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 331.646151] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 331.646404] dracut-initqueue[1065]: Warning: # #
[ 331.646655] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 331.646858] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 331.647110] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 331.647314] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 331.647512] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 331.647782] dracut-initqueue[1065]: Warning: # #
[ 331.647989] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 331.648186] dracut-initqueue[1065]: Warning: # #
[ 331.648432] dracut-initqueue[1065]: Warning: Reason unknown
[ 331.648634] dracut-initqueue[1065]: Warning: # #
[ 331.648828] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 333.327396] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 333.332047] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 333.335270] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 333.338512] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 333.343037] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 333.343682] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 333.343937] dracut-initqueue[1065]: Warning: # #
[ 333.344186] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 333.344389] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 333.344640] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 333.344844] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 333.345041] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 333.345290] dracut-initqueue[1065]: Warning: # #
[ 333.345493] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 333.345689] dracut-initqueue[1065]: Warning: # #
[ 333.345932] dracut-initqueue[1065]: Warning: Reason unknown
[ 333.346133] dracut-initqueue[1065]: Warning: # #
[ 333.346329] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 335.087316] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 335.091897] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 335.095116] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 335.098217] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 335.102721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 335.103366] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 335.103620] dracut-initqueue[1065]: Warning: # #
[ 335.103873] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 335.104076] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 335.104328] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 335.104533] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 335.104752] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 335.105006] dracut-initqueue[1065]: Warning: # #
[ 335.105210] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 335.105406] dracut-initqueue[1065]: Warning: # #
[ 335.105649] dracut-initqueue[1065]: Warning: Reason unknown
[ 335.105851] dracut-initqueue[1065]: Warning: # #
[ 335.106047] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 336.845524] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 336.850347] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 336.856152] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 336.859382] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 336.863926] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 336.864549] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 336.864804] dracut-initqueue[1065]: Warning: # #
[ 336.865055] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 336.865258] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 336.865510] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 336.865712] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 336.865907] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 336.866156] dracut-initqueue[1065]: Warning: # #
[ 336.866360] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 336.866555] dracut-initqueue[1065]: Warning: # #
[ 336.866799] dracut-initqueue[1065]: Warning: Reason unknown
[ 336.866999] dracut-initqueue[1065]: Warning: # #
[ 336.867195] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 338.615468] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 338.620240] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 338.626065] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 338.629310] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 338.633743] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 338.634397] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 338.634649] dracut-initqueue[1065]: Warning: # #
[ 338.634903] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 338.635106] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 338.635358] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 338.635562] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 338.635756] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 338.636005] dracut-initqueue[1065]: Warning: # #
[ 338.636211] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 338.636408] dracut-initqueue[1065]: Warning: # #
[ 338.636651] dracut-initqueue[1065]: Warning: Reason unknown
[ 338.636852] dracut-initqueue[1065]: Warning: # #
[ 338.637047] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 340.315278] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 340.319913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 340.325601] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 340.328741] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 340.333105] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 340.333705] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 340.333947] dracut-initqueue[1065]: Warning: # #
[ 340.334187] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 340.334383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 340.334659] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 340.334858] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 340.335045] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 340.335288] dracut-initqueue[1065]: Warning: # #
[ 340.335485] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 340.335675] dracut-initqueue[1065]: Warning: # #
[ 340.335860] dracut-initqueue[1065]: Warning: Reason unknown
[ 340.336089] dracut-initqueue[1065]: Warning: # #
[ 340.336285] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[2J[3J[-1;-1f[40m[2J[3J[-1;-1f[?25l[40m[-1;-1f[37m■ [33m■ [33m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[2J[3J[-1;-1f[49m[2J[3J[-1;-1f[?25h[2J[3J[-1;-1f[[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System.
[[0;32m OK [0m] Started [0;1;39mplymouth-start.ser…e[0m - Show Plymouth Boot Screen.
[[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo…uests to Plymouth Directory Watch.
[[0;32m OK [0m] Reached target [0;1;39mcryptsetup.…get[0m - Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mpaths.target[0m - Path Units.
[[0;32m OK [0m] Finished [0;1;39msystemd-udev-sett…To Complete Device Initialization.
Starting [0;1;39mmultipathd.servic…per Multipath Device Controller...
[[0;32m OK [0m] Started [0;1;39mmultipathd.service…apper Multipath Device Controller.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization.
[[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System.
[ 187.467377] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 187.469415] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 187.473337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 187.477200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 187.482582] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 187.483402] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 187.483737] dracut-initqueue[1065]: Warning: # #
[ 187.484054] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 187.484383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 187.484694] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 187.484961] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 187.485282] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 187.485524] dracut-initqueue[1065]: Warning: # #
[ 187.485841] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 187.486099] dracut-initqueue[1065]: Warning: # #
[ 187.486402] dracut-initqueue[1065]: Warning: Reason unknown
[ 187.486643] dracut-initqueue[1065]: Warning: # #
[ 187.486952] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 189.120808] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 189.122922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 189.126704] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 189.130485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 189.135624] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 189.136460] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 189.136784] dracut-initqueue[1065]: Warning: # #
[ 189.137103] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 189.137431] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 189.137739] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 189.137981] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 189.138307] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 189.138554] dracut-initqueue[1065]: Warning: # #
[ 189.138871] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 189.139109] dracut-initqueue[1065]: Warning: # #
[ 189.139419] dracut-initqueue[1065]: Warning: Reason unknown
[ 189.139664] dracut-initqueue[1065]: Warning: # #
[ 189.139973] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 190.741582] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 190.743676] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 190.747453] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 190.751245] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 190.756484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 190.757315] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 190.757637] dracut-initqueue[1065]: Warning: # #
[ 190.757958] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 190.758273] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 190.758587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 190.758833] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 190.759141] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 190.759385] dracut-initqueue[1065]: Warning: # #
[ 190.759695] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 190.759936] dracut-initqueue[1065]: Warning: # #
[ 190.760281] dracut-initqueue[1065]: Warning: Reason unknown
[ 190.760598] dracut-initqueue[1065]: Warning: # #
[ 190.760848] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 192.416393] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 192.418585] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 192.422449] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 192.426302] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 192.431598] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 192.432422] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 192.432740] dracut-initqueue[1065]: Warning: # #
[ 192.433056] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 192.433387] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 192.433697] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 192.433941] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 192.434256] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 192.434499] dracut-initqueue[1065]: Warning: # #
[ 192.434833] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 192.435066] dracut-initqueue[1065]: Warning: # #
[ 192.435370] dracut-initqueue[1065]: Warning: Reason unknown
[ 192.435612] dracut-initqueue[1065]: Warning: # #
[ 192.435921] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 194.075139] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 194.077330] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 194.081199] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 194.085001] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 194.090318] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 194.091144] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 194.091460] dracut-initqueue[1065]: Warning: # #
[ 194.091780] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 194.092141] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 194.092383] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 194.092691] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 194.092933] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 194.093243] dracut-initqueue[1065]: Warning: # #
[ 194.093487] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 194.093788] dracut-initqueue[1065]: Warning: # #
[ 194.094096] dracut-initqueue[1065]: Warning: Reason unknown
[ 194.094330] dracut-initqueue[1065]: Warning: # #
[ 194.094644] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 195.735657] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 195.737921] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 195.741729] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 195.745468] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 195.750745] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 195.751558] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 195.751885] dracut-initqueue[1065]: Warning: # #
[ 195.752199] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 195.752517] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 195.752835] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 195.753070] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 195.753378] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 195.753623] dracut-initqueue[1065]: Warning: # #
[ 195.753924] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 195.754160] dracut-initqueue[1065]: Warning: # #
[ 195.754473] dracut-initqueue[1065]: Warning: Reason unknown
[ 195.754787] dracut-initqueue[1065]: Warning: # #
[ 195.755035] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 197.375013] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 197.380454] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 197.387223] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 197.391096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 197.396315] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 197.397140] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 197.397462] dracut-initqueue[1065]: Warning: # #
[ 197.397773] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 197.398104] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 197.398412] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 197.398690] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 197.399014] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 197.399257] dracut-initqueue[1065]: Warning: # #
[ 197.399568] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 197.399802] dracut-initqueue[1065]: Warning: # #
[ 197.400160] dracut-initqueue[1065]: Warning: Reason unknown
[ 197.400409] dracut-initqueue[1065]: Warning: # #
[ 197.400717] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 199.054097] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 199.059331] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 199.066215] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 199.069994] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 199.075198] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 199.076011] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 199.076366] dracut-initqueue[1065]: Warning: # #
[ 199.076678] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 199.076997] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 199.077307] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 199.077541] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 199.077846] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 199.078088] dracut-initqueue[1065]: Warning: # #
[ 199.078421] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 199.078655] dracut-initqueue[1065]: Warning: # #
[ 199.078977] dracut-initqueue[1065]: Warning: Reason unknown
[ 199.079214] dracut-initqueue[1065]: Warning: # #
[ 199.079529] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 200.743971] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 200.749330] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 200.756144] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 200.759905] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 200.765129] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 200.765946] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 200.766276] dracut-initqueue[1065]: Warning: # #
[ 200.766594] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 200.766927] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 200.767238] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 200.767483] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 200.767787] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 200.768028] dracut-initqueue[1065]: Warning: # #
[ 200.768350] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 200.768591] dracut-initqueue[1065]: Warning: # #
[ 200.768889] dracut-initqueue[1065]: Warning: Reason unknown
[ 200.769209] dracut-initqueue[1065]: Warning: # #
[ 200.769451] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 202.374834] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 202.380261] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 202.387131] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 202.390987] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 202.396262] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 202.397087] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 202.397422] dracut-initqueue[1065]: Warning: # #
[ 202.397731] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 202.398048] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 202.398364] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 202.398607] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 202.398915] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 202.399161] dracut-initqueue[1065]: Warning: # #
[ 202.399482] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 202.399716] dracut-initqueue[1065]: Warning: # #
[ 202.400081] dracut-initqueue[1065]: Warning: Reason unknown
[ 202.400325] dracut-initqueue[1065]: Warning: # #
[ 202.400636] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 204.041916] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 204.047175] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 204.051066] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 204.057922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 204.063192] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 204.064019] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 204.064339] dracut-initqueue[1065]: Warning: # #
[ 204.064656] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 204.064980] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 204.065297] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 204.065540] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 204.065848] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 204.066095] dracut-initqueue[1065]: Warning: # #
[ 204.066440] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 204.066680] dracut-initqueue[1065]: Warning: # #
[ 204.066982] dracut-initqueue[1065]: Warning: Reason unknown
[ 204.067227] dracut-initqueue[1065]: Warning: # #
[ 204.067537] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 205.723901] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 205.729230] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 205.733120] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 205.736986] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 205.742307] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 205.743138] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 205.743463] dracut-initqueue[1065]: Warning: # #
[ 205.743781] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 205.744109] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 205.744426] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 205.744659] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 205.744969] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 205.745212] dracut-initqueue[1065]: Warning: # #
[ 205.745537] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 205.745778] dracut-initqueue[1065]: Warning: # #
[ 205.746084] dracut-initqueue[1065]: Warning: Reason unknown
[ 205.746393] dracut-initqueue[1065]: Warning: # #
[ 205.746634] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 207.370533] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 207.372632] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 207.376538] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 207.380474] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 207.390898] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 207.391717] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 207.392045] dracut-initqueue[1065]: Warning: # #
[ 207.392364] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 207.392679] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 207.392981] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 207.393288] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 207.393534] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 207.393841] dracut-initqueue[1065]: Warning: # #
[ 207.394105] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 207.394409] dracut-initqueue[1065]: Warning: # #
[ 207.394718] dracut-initqueue[1065]: Warning: Reason unknown
[ 207.394951] dracut-initqueue[1065]: Warning: # #
[ 207.395267] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 209.002753] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 209.004870] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 209.008716] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 209.012586] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 209.017877] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 209.018693] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 209.019015] dracut-initqueue[1065]: Warning: # #
[ 209.019334] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 209.019662] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 209.019983] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 209.020275] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 209.020586] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 209.020855] dracut-initqueue[1065]: Warning: # #
[ 209.021171] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 209.021419] dracut-initqueue[1065]: Warning: # #
[ 209.021728] dracut-initqueue[1065]: Warning: Reason unknown
[ 209.021985] dracut-initqueue[1065]: Warning: # #
[ 209.022294] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 210.643008] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 210.648273] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 210.652069] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 210.658894] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 210.664065] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 210.664892] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 210.665213] dracut-initqueue[1065]: Warning: # #
[ 210.665533] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 210.665903] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 210.666215] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 210.666449] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 210.666753] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 210.666997] dracut-initqueue[1065]: Warning: # #
[ 210.667319] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 210.667563] dracut-initqueue[1065]: Warning: # #
[ 210.667866] dracut-initqueue[1065]: Warning: Reason unknown
[ 210.668188] dracut-initqueue[1065]: Warning: # #
[ 210.668430] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 212.322824] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 212.328115] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 212.331924] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 212.338751] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 212.343960] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 212.344771] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 212.345113] dracut-initqueue[1065]: Warning: # #
[ 212.345433] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 212.345751] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 212.346057] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 212.346301] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 212.346614] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 212.346860] dracut-initqueue[1065]: Warning: # #
[ 212.347166] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 212.347401] dracut-initqueue[1065]: Warning: # #
[ 212.347704] dracut-initqueue[1065]: Warning: Reason unknown
[ 212.348015] dracut-initqueue[1065]: Warning: # #
[ 212.348262] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 214.026898] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 214.029034] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 214.032978] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 214.036816] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 214.042138] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 214.042943] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 214.043273] dracut-initqueue[1065]: Warning: # #
[ 214.043610] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 214.043921] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 214.044239] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 214.044480] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 214.044782] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 214.045024] dracut-initqueue[1065]: Warning: # #
[ 214.045330] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 214.045564] dracut-initqueue[1065]: Warning: # #
[ 214.045891] dracut-initqueue[1065]: Warning: Reason unknown
[ 214.046201] dracut-initqueue[1065]: Warning: # #
[ 214.046449] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 215.686310] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 215.688468] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 215.692386] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 215.696210] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 215.701484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 215.702308] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 215.702629] dracut-initqueue[1065]: Warning: # #
[ 215.702946] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 215.703311] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 215.703553] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 215.703858] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 215.704101] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 215.704412] dracut-initqueue[1065]: Warning: # #
[ 215.704656] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 215.704960] dracut-initqueue[1065]: Warning: # #
[ 215.705273] dracut-initqueue[1065]: Warning: Reason unknown
[ 215.705518] dracut-initqueue[1065]: Warning: # #
[ 215.705826] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 217.343157] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 217.345337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 217.349211] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 217.353051] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 217.358238] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 217.359059] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 217.359394] dracut-initqueue[1065]: Warning: # #
[ 217.359713] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 217.360099] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 217.360336] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 217.360640] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 217.360885] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 217.361190] dracut-initqueue[1065]: Warning: # #
[ 217.361431] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 217.361742] dracut-initqueue[1065]: Warning: # #
[ 217.362047] dracut-initqueue[1065]: Warning: Reason unknown
[ 217.362355] dracut-initqueue[1065]: Warning: # #
[ 217.362595] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 218.964365] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 218.969649] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 218.976406] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 218.980173] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 218.985361] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 218.986184] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 218.986514] dracut-initqueue[1065]: Warning: # #
[ 218.986840] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 218.987158] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 218.987470] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 218.987770] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 218.988105] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 218.988347] dracut-initqueue[1065]: Warning: # #
[ 218.988654] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 218.988913] dracut-initqueue[1065]: Warning: # #
[ 218.989224] dracut-initqueue[1065]: Warning: Reason unknown
[ 218.989467] dracut-initqueue[1065]: Warning: # #
[ 218.989793] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 220.612651] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 220.614774] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 220.618656] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 220.622474] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 220.627781] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 220.628606] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 220.628924] dracut-initqueue[1065]: Warning: # #
[ 220.629245] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 220.629579] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 220.629895] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 220.630184] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 220.630503] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 220.630749] dracut-initqueue[1065]: Warning: # #
[ 220.631062] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 220.631306] dracut-initqueue[1065]: Warning: # #
[ 220.631606] dracut-initqueue[1065]: Warning: Reason unknown
[ 220.631852] dracut-initqueue[1065]: Warning: # #
[ 220.632169] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 222.277601] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 222.279768] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 222.283571] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 222.287441] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 222.292759] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 222.293577] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 222.293895] dracut-initqueue[1065]: Warning: # #
[ 222.294217] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 222.294580] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 222.294823] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 222.295134] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 222.295372] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 222.295681] dracut-initqueue[1065]: Warning: # #
[ 222.295927] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 222.296229] dracut-initqueue[1065]: Warning: # #
[ 222.296536] dracut-initqueue[1065]: Warning: Reason unknown
[ 222.296845] dracut-initqueue[1065]: Warning: # #
[ 222.297093] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 223.952352] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 223.954575] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 223.958464] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 223.962325] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 223.967570] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 223.968377] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 223.968699] dracut-initqueue[1065]: Warning: # #
[ 223.969022] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 223.969354] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 223.969671] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 223.969916] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 223.970276] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 223.970525] dracut-initqueue[1065]: Warning: # #
[ 223.970838] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 223.971073] dracut-initqueue[1065]: Warning: # #
[ 223.971378] dracut-initqueue[1065]: Warning: Reason unknown
[ 223.971611] dracut-initqueue[1065]: Warning: # #
[ 223.971943] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 225.604452] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 225.609737] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 225.616635] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 225.620455] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 225.625632] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 225.626430] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 225.626751] dracut-initqueue[1065]: Warning: # #
[ 225.627071] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 225.627404] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 225.627710] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 225.627954] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 225.628266] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 225.628513] dracut-initqueue[1065]: Warning: # #
[ 225.628826] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 225.629060] dracut-initqueue[1065]: Warning: # #
[ 225.629362] dracut-initqueue[1065]: Warning: Reason unknown
[ 225.629667] dracut-initqueue[1065]: Warning: # #
[ 225.629915] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 227.344299] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 227.346522] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 227.350465] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 227.354277] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 227.359512] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 227.360394] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 227.360715] dracut-initqueue[1065]: Warning: # #
[ 227.361032] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 227.361378] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 227.361620] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 227.361925] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 227.362184] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 227.362499] dracut-initqueue[1065]: Warning: # #
[ 227.362742] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 227.363059] dracut-initqueue[1065]: Warning: # #
[ 227.363291] dracut-initqueue[1065]: Warning: Reason unknown
[ 227.363601] dracut-initqueue[1065]: Warning: # #
[ 227.363848] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 229.004196] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 229.006361] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 229.010282] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 229.014010] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 229.019275] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 229.020133] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 229.020457] dracut-initqueue[1065]: Warning: # #
[ 229.020775] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 229.021110] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 229.021418] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 229.021661] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 229.021971] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 229.022215] dracut-initqueue[1065]: Warning: # #
[ 229.022528] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 229.022776] dracut-initqueue[1065]: Warning: # #
[ 229.023077] dracut-initqueue[1065]: Warning: Reason unknown
[ 229.023310] dracut-initqueue[1065]: Warning: # #
[ 229.023639] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 230.665606] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 230.670751] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 230.674536] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 230.678242] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 230.683535] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 230.684366] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 230.684685] dracut-initqueue[1065]: Warning: # #
[ 230.685006] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 230.685342] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 230.685652] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 230.685896] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 230.686207] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 230.686452] dracut-initqueue[1065]: Warning: # #
[ 230.686783] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 230.687032] dracut-initqueue[1065]: Warning: # #
[ 230.687333] dracut-initqueue[1065]: Warning: Reason unknown
[ 230.687577] dracut-initqueue[1065]: Warning: # #
[ 230.687886] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 232.342970] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 232.348301] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 232.352173] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 232.358965] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 232.364184] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 232.365000] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 232.365320] dracut-initqueue[1065]: Warning: # #
[ 232.365638] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 232.366005] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 232.366249] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 232.366560] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 232.366798] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 232.367105] dracut-initqueue[1065]: Warning: # #
[ 232.367353] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 232.367667] dracut-initqueue[1065]: Warning: # #
[ 232.367973] dracut-initqueue[1065]: Warning: Reason unknown
[ 232.368281] dracut-initqueue[1065]: Warning: # #
[ 232.368520] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 234.080263] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 234.085491] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 234.089318] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 234.093200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 234.098426] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 234.099251] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 234.099568] dracut-initqueue[1065]: Warning: # #
[ 234.099892] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 234.100264] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 234.100577] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 234.100821] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 234.101134] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 234.101378] dracut-initqueue[1065]: Warning: # #
[ 234.101695] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 234.101958] dracut-initqueue[1065]: Warning: # #
[ 234.102276] dracut-initqueue[1065]: Warning: Reason unknown
[ 234.102522] dracut-initqueue[1065]: Warning: # #
[ 234.102837] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 235.806091] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 235.808244] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 235.812122] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 235.815961] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 235.821286] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 235.822099] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 235.822418] dracut-initqueue[1065]: Warning: # #
[ 235.822734] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 235.823049] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 235.823358] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 235.823601] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 235.823911] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 235.824155] dracut-initqueue[1065]: Warning: # #
[ 235.824475] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 235.824711] dracut-initqueue[1065]: Warning: # #
[ 235.825014] dracut-initqueue[1065]: Warning: Reason unknown
[ 235.825320] dracut-initqueue[1065]: Warning: # #
[ 235.825567] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 237.468730] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 237.474032] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 237.477853] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 237.481594] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 237.486746] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 237.487564] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 237.487883] dracut-initqueue[1065]: Warning: # #
[ 237.488198] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 237.488516] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 237.488824] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 237.489130] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 237.489374] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 237.489682] dracut-initqueue[1065]: Warning: # #
[ 237.489929] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 237.490289] dracut-initqueue[1065]: Warning: # #
[ 237.490599] dracut-initqueue[1065]: Warning: Reason unknown
[ 237.490832] dracut-initqueue[1065]: Warning: # #
[ 237.491142] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 239.164220] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 239.169577] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 239.176482] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 239.180275] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 239.185473] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 239.186293] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 239.186613] dracut-initqueue[1065]: Warning: # #
[ 239.186927] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 239.187245] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 239.187578] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 239.187813] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 239.188119] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 239.188364] dracut-initqueue[1065]: Warning: # #
[ 239.188692] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 239.188930] dracut-initqueue[1065]: Warning: # #
[ 239.189235] dracut-initqueue[1065]: Warning: Reason unknown
[ 239.189467] dracut-initqueue[1065]: Warning: # #
[ 239.189778] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 240.846470] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 240.848645] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 240.852501] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 240.856375] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 240.861720] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 240.862531] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 240.862851] dracut-initqueue[1065]: Warning: # #
[ 240.863171] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 240.863481] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 240.863791] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 240.864035] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 240.864351] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 240.864596] dracut-initqueue[1065]: Warning: # #
[ 240.864911] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 240.865147] dracut-initqueue[1065]: Warning: # #
[ 240.865454] dracut-initqueue[1065]: Warning: Reason unknown
[ 240.865686] dracut-initqueue[1065]: Warning: # #
[ 240.865997] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 242.554739] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 242.560096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 242.566913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 242.570700] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 242.575926] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 242.576729] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 242.577049] dracut-initqueue[1065]: Warning: # #
[ 242.577368] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 242.577706] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 242.578014] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 242.578258] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 242.578572] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 242.578817] dracut-initqueue[1065]: Warning: # #
[ 242.579149] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 242.579388] dracut-initqueue[1065]: Warning: # #
[ 242.579695] dracut-initqueue[1065]: Warning: Reason unknown
[ 242.579941] dracut-initqueue[1065]: Warning: # #
[ 242.580285] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 244.236452] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 244.241849] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 244.248652] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 244.252469] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 244.257715] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 244.258538] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 244.258859] dracut-initqueue[1065]: Warning: # #
[ 244.259167] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 244.259479] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 244.259818] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 244.260102] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 244.260415] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 244.260661] dracut-initqueue[1065]: Warning: # #
[ 244.260982] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 244.261218] dracut-initqueue[1065]: Warning: # #
[ 244.261522] dracut-initqueue[1065]: Warning: Reason unknown
[ 244.261754] dracut-initqueue[1065]: Warning: # #
[ 244.262067] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 245.938665] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 245.943877] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 245.947683] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 245.951595] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 245.956816] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 245.957647] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 245.957974] dracut-initqueue[1065]: Warning: # #
[ 245.958296] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 245.958632] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 245.958951] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 245.959195] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 245.959504] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 245.959749] dracut-initqueue[1065]: Warning: # #
[ 245.960130] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 245.960378] dracut-initqueue[1065]: Warning: # #
[ 245.960687] dracut-initqueue[1065]: Warning: Reason unknown
[ 245.960925] dracut-initqueue[1065]: Warning: # #
[ 245.961234] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 247.618170] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 247.623607] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 247.627437] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 247.631352] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 247.636590] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 247.637417] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 247.637737] dracut-initqueue[1065]: Warning: # #
[ 247.638049] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 247.638374] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 247.638682] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 247.638926] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 247.639232] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 247.639475] dracut-initqueue[1065]: Warning: # #
[ 247.639790] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 247.640080] dracut-initqueue[1065]: Warning: # #
[ 247.640385] dracut-initqueue[1065]: Warning: Reason unknown
[ 247.640699] dracut-initqueue[1065]: Warning: # #
[ 247.640946] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 249.332644] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 249.337971] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 249.344788] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 249.348497] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 249.353794] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 249.354606] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 249.354928] dracut-initqueue[1065]: Warning: # #
[ 249.355239] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 249.355557] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 249.355896] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 249.356138] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 249.356451] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 249.356695] dracut-initqueue[1065]: Warning: # #
[ 249.357003] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 249.357239] dracut-initqueue[1065]: Warning: # #
[ 249.357549] dracut-initqueue[1065]: Warning: Reason unknown
[ 249.357781] dracut-initqueue[1065]: Warning: # #
[ 249.358084] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 250.997662] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 251.003096] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 251.009863] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 251.013636] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 251.018838] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 251.019668] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 251.019996] dracut-initqueue[1065]: Warning: # #
[ 251.020362] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 251.020679] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 251.021006] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 251.021241] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 251.021543] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 251.021785] dracut-initqueue[1065]: Warning: # #
[ 251.022089] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 251.022325] dracut-initqueue[1065]: Warning: # #
[ 251.022632] dracut-initqueue[1065]: Warning: Reason unknown
[ 251.022960] dracut-initqueue[1065]: Warning: # #
[ 251.023201] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 252.644254] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 252.649481] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 252.656275] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 252.662982] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 252.668141] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 252.668965] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 252.669285] dracut-initqueue[1065]: Warning: # #
[ 252.669597] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 252.669910] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 252.670280] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 252.670546] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 252.670869] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 252.671116] dracut-initqueue[1065]: Warning: # #
[ 252.671435] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 252.671679] dracut-initqueue[1065]: Warning: # #
[ 252.671979] dracut-initqueue[1065]: Warning: Reason unknown
[ 252.672226] dracut-initqueue[1065]: Warning: # #
[ 252.672534] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 254.292604] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 254.294799] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 254.298687] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 254.302566] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 254.307845] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 254.308670] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 254.308993] dracut-initqueue[1065]: Warning: # #
[ 254.309307] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 254.309626] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 254.309947] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 254.310227] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 254.310538] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 254.310782] dracut-initqueue[1065]: Warning: # #
[ 254.311087] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 254.311323] dracut-initqueue[1065]: Warning: # #
[ 254.311628] dracut-initqueue[1065]: Warning: Reason unknown
[ 254.311955] dracut-initqueue[1065]: Warning: # #
[ 254.312198] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 255.946754] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 255.948840] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 255.952746] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 255.956589] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 255.961857] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 255.962672] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 255.962994] dracut-initqueue[1065]: Warning: # #
[ 255.963313] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 255.963628] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 255.963937] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 255.964182] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 255.964500] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 255.964742] dracut-initqueue[1065]: Warning: # #
[ 255.965057] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 255.965317] dracut-initqueue[1065]: Warning: # #
[ 255.965624] dracut-initqueue[1065]: Warning: Reason unknown
[ 255.965869] dracut-initqueue[1065]: Warning: # #
[ 255.966177] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 257.588621] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 257.590771] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 257.594645] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 257.598442] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 257.603721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 257.604547] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 257.604867] dracut-initqueue[1065]: Warning: # #
[ 257.605175] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 257.605487] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 257.605805] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 257.606039] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 257.606345] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 257.606589] dracut-initqueue[1065]: Warning: # #
[ 257.606901] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 257.607137] dracut-initqueue[1065]: Warning: # #
[ 257.607453] dracut-initqueue[1065]: Warning: Reason unknown
[ 257.607764] dracut-initqueue[1065]: Warning: # #
[ 257.608013] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 259.266369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 259.268556] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 259.272439] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 259.276278] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 259.281538] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 259.282374] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 259.282702] dracut-initqueue[1065]: Warning: # #
[ 259.283024] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 259.283357] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 259.283676] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 259.283917] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 259.284235] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 259.284478] dracut-initqueue[1065]: Warning: # #
[ 259.284802] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 259.285042] dracut-initqueue[1065]: Warning: # #
[ 259.285351] dracut-initqueue[1065]: Warning: Reason unknown
[ 259.285595] dracut-initqueue[1065]: Warning: # #
[ 259.285903] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 260.891775] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 260.896966] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 260.903767] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 260.907473] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 260.912757] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 260.913573] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 260.913892] dracut-initqueue[1065]: Warning: # #
[ 260.914202] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 260.914512] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 260.914833] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 260.915068] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 260.915375] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 260.915618] dracut-initqueue[1065]: Warning: # #
[ 260.915929] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 260.916187] dracut-initqueue[1065]: Warning: # #
[ 260.916494] dracut-initqueue[1065]: Warning: Reason unknown
[ 260.916804] dracut-initqueue[1065]: Warning: # #
[ 260.917053] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 262.555168] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 262.560542] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 262.567336] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 262.571179] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 262.576441] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 262.577247] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 262.577567] dracut-initqueue[1065]: Warning: # #
[ 262.577875] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 262.578187] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 262.578502] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 262.578738] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 262.579051] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 262.579294] dracut-initqueue[1065]: Warning: # #
[ 262.579610] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 262.579854] dracut-initqueue[1065]: Warning: # #
[ 262.580203] dracut-initqueue[1065]: Warning: Reason unknown
[ 262.580522] dracut-initqueue[1065]: Warning: # #
[ 262.580766] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 264.238334] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 264.243663] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 264.250459] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 264.254303] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 264.259537] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 264.260400] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 264.260724] dracut-initqueue[1065]: Warning: # #
[ 264.261043] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 264.261357] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 264.261667] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 264.261912] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 264.262222] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 264.262469] dracut-initqueue[1065]: Warning: # #
[ 264.262773] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 264.263008] dracut-initqueue[1065]: Warning: # #
[ 264.263318] dracut-initqueue[1065]: Warning: Reason unknown
[ 264.263552] dracut-initqueue[1065]: Warning: # #
[ 264.263867] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 265.953439] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 265.958743] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 265.962556] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 265.969446] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 265.974651] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 265.975473] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 265.975797] dracut-initqueue[1065]: Warning: # #
[ 265.976110] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 265.976436] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 265.976742] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 265.976988] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 265.977293] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 265.977540] dracut-initqueue[1065]: Warning: # #
[ 265.977868] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 265.978114] dracut-initqueue[1065]: Warning: # #
[ 265.978416] dracut-initqueue[1065]: Warning: Reason unknown
[ 265.978658] dracut-initqueue[1065]: Warning: # #
[ 265.978967] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 267.668896] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 267.671082] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 267.674937] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 267.678842] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 267.689063] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 267.689885] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 267.690243] dracut-initqueue[1065]: Warning: # #
[ 267.690557] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 267.690881] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 267.691194] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 267.691437] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 267.691744] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 267.691991] dracut-initqueue[1065]: Warning: # #
[ 267.692301] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 267.692535] dracut-initqueue[1065]: Warning: # #
[ 267.692845] dracut-initqueue[1065]: Warning: Reason unknown
[ 267.693079] dracut-initqueue[1065]: Warning: # #
[ 267.693392] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 269.295339] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 269.300736] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 269.307493] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 269.314260] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 269.319414] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 269.320289] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 269.320611] dracut-initqueue[1065]: Warning: # #
[ 269.320928] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 269.321250] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 269.321587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 269.321829] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 269.322167] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 269.322410] dracut-initqueue[1065]: Warning: # #
[ 269.322718] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 269.322952] dracut-initqueue[1065]: Warning: # #
[ 269.323263] dracut-initqueue[1065]: Warning: Reason unknown
[ 269.323577] dracut-initqueue[1065]: Warning: # #
[ 269.323889] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 270.945427] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 270.950764] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 270.957524] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 270.961306] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 270.966544] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 270.967434] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 270.967758] dracut-initqueue[1065]: Warning: # #
[ 270.968076] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 270.968394] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 270.968696] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 270.969011] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 270.969256] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 270.969571] dracut-initqueue[1065]: Warning: # #
[ 270.969835] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 270.970190] dracut-initqueue[1065]: Warning: # #
[ 270.970433] dracut-initqueue[1065]: Warning: Reason unknown
[ 270.970738] dracut-initqueue[1065]: Warning: # #
[ 270.970990] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 272.623103] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 272.628383] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 272.632183] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 272.639011] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 272.644224] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 272.645048] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 272.645380] dracut-initqueue[1065]: Warning: # #
[ 272.645735] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 272.646073] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 272.646404] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 272.646719] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 272.646954] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 272.647268] dracut-initqueue[1065]: Warning: # #
[ 272.647532] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 272.647837] dracut-initqueue[1065]: Warning: # #
[ 272.648142] dracut-initqueue[1065]: Warning: Reason unknown
[ 272.648387] dracut-initqueue[1065]: Warning: # #
[ 272.648697] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 274.283732] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 274.285923] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 274.289781] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 274.293769] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 274.299014] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 274.299839] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 274.300188] dracut-initqueue[1065]: Warning: # #
[ 274.300507] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 274.300818] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 274.301145] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 274.301377] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 274.301687] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 274.301930] dracut-initqueue[1065]: Warning: # #
[ 274.302238] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 274.302477] dracut-initqueue[1065]: Warning: # #
[ 274.302778] dracut-initqueue[1065]: Warning: Reason unknown
[ 274.303086] dracut-initqueue[1065]: Warning: # #
[ 274.303333] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 275.973351] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 275.975534] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 275.979411] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 275.983288] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 275.988545] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 275.989375] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 275.989692] dracut-initqueue[1065]: Warning: # #
[ 275.990043] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 275.990405] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 275.990742] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 275.990989] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 275.991292] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 275.991537] dracut-initqueue[1065]: Warning: # #
[ 275.991866] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 275.992104] dracut-initqueue[1065]: Warning: # #
[ 275.992413] dracut-initqueue[1065]: Warning: Reason unknown
[ 275.992659] dracut-initqueue[1065]: Warning: # #
[ 275.992962] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 277.684245] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 277.689608] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 277.696499] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 277.700334] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 277.705620] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 277.706431] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 277.706744] dracut-initqueue[1065]: Warning: # #
[ 277.707060] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 277.707372] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 277.707677] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 277.707990] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 277.708229] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 277.708536] dracut-initqueue[1065]: Warning: # #
[ 277.708781] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 277.709103] dracut-initqueue[1065]: Warning: # #
[ 277.709413] dracut-initqueue[1065]: Warning: Reason unknown
[ 277.709661] dracut-initqueue[1065]: Warning: # #
[ 277.709969] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 279.384490] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 279.389773] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 279.396604] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 279.400449] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 279.405670] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 279.406479] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 279.406795] dracut-initqueue[1065]: Warning: # #
[ 279.407113] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 279.407423] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 279.407737] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 279.407972] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 279.408275] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 279.408519] dracut-initqueue[1065]: Warning: # #
[ 279.408829] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 279.409072] dracut-initqueue[1065]: Warning: # #
[ 279.409376] dracut-initqueue[1065]: Warning: Reason unknown
[ 279.409688] dracut-initqueue[1065]: Warning: # #
[ 279.409934] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 281.052057] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 281.057253] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 281.061139] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 281.067915] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 281.073334] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 281.074150] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 281.074467] dracut-initqueue[1065]: Warning: # #
[ 281.074785] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 281.075111] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 281.075424] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 281.075666] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 281.075970] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 281.076215] dracut-initqueue[1065]: Warning: # #
[ 281.076525] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 281.076765] dracut-initqueue[1065]: Warning: # #
[ 281.077071] dracut-initqueue[1065]: Warning: Reason unknown
[ 281.077303] dracut-initqueue[1065]: Warning: # #
[ 281.077614] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 282.768510] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 282.770706] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 282.774567] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 282.778446] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 282.783723] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 282.784530] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 282.784864] dracut-initqueue[1065]: Warning: # #
[ 282.785173] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 282.785485] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 282.785801] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 282.786060] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 282.786374] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 282.786620] dracut-initqueue[1065]: Warning: # #
[ 282.786933] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 282.787176] dracut-initqueue[1065]: Warning: # #
[ 282.787477] dracut-initqueue[1065]: Warning: Reason unknown
[ 282.787722] dracut-initqueue[1065]: Warning: # #
[ 282.788030] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 284.409074] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 284.411209] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 284.415090] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 284.418885] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 284.429249] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 284.430087] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 284.430410] dracut-initqueue[1065]: Warning: # #
[ 284.430731] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 284.431052] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 284.431365] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 284.431676] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 284.432013] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 284.432253] dracut-initqueue[1065]: Warning: # #
[ 284.432564] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 284.432810] dracut-initqueue[1065]: Warning: # #
[ 284.433120] dracut-initqueue[1065]: Warning: Reason unknown
[ 284.433380] dracut-initqueue[1065]: Warning: # #
[ 284.433685] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 286.053659] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 286.059036] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 286.062920] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 286.069773] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 286.080102] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 286.080928] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 286.081240] dracut-initqueue[1065]: Warning: # #
[ 286.081558] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 286.081874] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 286.082189] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 286.082454] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 286.082771] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 286.083015] dracut-initqueue[1065]: Warning: # #
[ 286.083345] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 286.083593] dracut-initqueue[1065]: Warning: # #
[ 286.083893] dracut-initqueue[1065]: Warning: Reason unknown
[ 286.084130] dracut-initqueue[1065]: Warning: # #
[ 286.084438] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 287.723369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 287.728739] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 287.735577] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 287.739334] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 287.744498] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 287.745319] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 287.745633] dracut-initqueue[1065]: Warning: # #
[ 287.745944] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 287.746271] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 287.746587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 287.746828] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 287.747134] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 287.747378] dracut-initqueue[1065]: Warning: # #
[ 287.747687] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 287.747919] dracut-initqueue[1065]: Warning: # #
[ 287.748220] dracut-initqueue[1065]: Warning: Reason unknown
[ 287.748536] dracut-initqueue[1065]: Warning: # #
[ 287.748781] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 289.426418] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 289.431709] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 289.435490] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 289.439282] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 289.444574] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 289.445401] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 289.445712] dracut-initqueue[1065]: Warning: # #
[ 289.446027] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 289.446339] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 289.446651] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 289.446887] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 289.447190] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 289.447433] dracut-initqueue[1065]: Warning: # #
[ 289.447741] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 289.447981] dracut-initqueue[1065]: Warning: # #
[ 289.448285] dracut-initqueue[1065]: Warning: Reason unknown
[ 289.448592] dracut-initqueue[1065]: Warning: # #
[ 289.448840] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 291.089534] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 291.094826] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 291.098647] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 291.102493] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 291.107727] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 291.108562] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 291.108891] dracut-initqueue[1065]: Warning: # #
[ 291.109234] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 291.109596] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 291.109918] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 291.110277] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 291.110523] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 291.110830] dracut-initqueue[1065]: Warning: # #
[ 291.111090] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 291.111394] dracut-initqueue[1065]: Warning: # #
[ 291.111702] dracut-initqueue[1065]: Warning: Reason unknown
[ 291.111945] dracut-initqueue[1065]: Warning: # #
[ 291.112254] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 292.763231] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 292.768506] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 292.772348] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 292.779191] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 292.784423] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 292.785241] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 292.785556] dracut-initqueue[1065]: Warning: # #
[ 292.785873] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 292.786184] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 292.786501] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 292.786735] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 292.787038] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 292.787282] dracut-initqueue[1065]: Warning: # #
[ 292.787618] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 292.787866] dracut-initqueue[1065]: Warning: # #
[ 292.788225] dracut-initqueue[1065]: Warning: Reason unknown
[ 292.788564] dracut-initqueue[1065]: Warning: # #
[ 292.788871] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 294.479263] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 294.484514] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 294.488349] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 294.492188] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 294.497485] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 294.498303] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 294.498621] dracut-initqueue[1065]: Warning: # #
[ 294.498932] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 294.499249] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 294.499556] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 294.499793] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 294.500153] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 294.500397] dracut-initqueue[1065]: Warning: # #
[ 294.500710] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 294.500951] dracut-initqueue[1065]: Warning: # #
[ 294.501252] dracut-initqueue[1065]: Warning: Reason unknown
[ 294.501497] dracut-initqueue[1065]: Warning: # #
[ 294.501803] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 296.185429] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 296.190646] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 296.193887] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 296.197062] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 296.201641] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 296.202268] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 296.202523] dracut-initqueue[1065]: Warning: # #
[ 296.202779] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 296.202986] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 296.203237] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 296.203437] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 296.203645] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 296.203896] dracut-initqueue[1065]: Warning: # #
[ 296.204122] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 296.204322] dracut-initqueue[1065]: Warning: # #
[ 296.204569] dracut-initqueue[1065]: Warning: Reason unknown
[ 296.204772] dracut-initqueue[1065]: Warning: # #
[ 296.204968] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 297.905351] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 297.907231] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 297.910596] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 297.913886] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 297.918340] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 297.918987] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 297.919240] dracut-initqueue[1065]: Warning: # #
[ 297.919497] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 297.919704] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 297.919954] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 297.920199] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 297.920398] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 297.920650] dracut-initqueue[1065]: Warning: # #
[ 297.920855] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 297.921051] dracut-initqueue[1065]: Warning: # #
[ 297.921297] dracut-initqueue[1065]: Warning: Reason unknown
[ 297.921500] dracut-initqueue[1065]: Warning: # #
[ 297.921695] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 299.526331] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 299.531065] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 299.534319] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 299.537554] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 299.542075] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 299.542727] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 299.542983] dracut-initqueue[1065]: Warning: # #
[ 299.543241] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 299.543448] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 299.543699] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 299.543901] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 299.544096] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 299.544348] dracut-initqueue[1065]: Warning: # #
[ 299.544567] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 299.544763] dracut-initqueue[1065]: Warning: # #
[ 299.545008] dracut-initqueue[1065]: Warning: Reason unknown
[ 299.545211] dracut-initqueue[1065]: Warning: # #
[ 299.545407] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 301.136918] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 301.141715] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 301.144909] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 301.148142] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 301.152644] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 301.153294] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 301.153549] dracut-initqueue[1065]: Warning: # #
[ 301.153807] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 301.154015] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 301.154268] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 301.154469] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 301.154663] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 301.154914] dracut-initqueue[1065]: Warning: # #
[ 301.155161] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 301.155361] dracut-initqueue[1065]: Warning: # #
[ 301.155609] dracut-initqueue[1065]: Warning: Reason unknown
[ 301.155814] dracut-initqueue[1065]: Warning: # #
[ 301.156009] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 302.800129] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 302.804654] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 302.807825] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 302.810990] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 302.815384] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 302.816018] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 302.816271] dracut-initqueue[1065]: Warning: # #
[ 302.816526] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 302.816733] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 302.816984] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 302.817207] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 302.817407] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 302.817659] dracut-initqueue[1065]: Warning: # #
[ 302.817876] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 302.818072] dracut-initqueue[1065]: Warning: # #
[ 302.818316] dracut-initqueue[1065]: Warning: Reason unknown
[ 302.818518] dracut-initqueue[1065]: Warning: # #
[ 302.818713] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 304.472900] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 304.474754] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 304.478069] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 304.481337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 304.485797] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 304.486437] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 304.486692] dracut-initqueue[1065]: Warning: # #
[ 304.486948] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 304.487155] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 304.487407] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 304.487608] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 304.487822] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 304.488076] dracut-initqueue[1065]: Warning: # #
[ 304.488281] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 304.488476] dracut-initqueue[1065]: Warning: # #
[ 304.488722] dracut-initqueue[1065]: Warning: Reason unknown
[ 304.488924] dracut-initqueue[1065]: Warning: # #
[ 304.489118] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 306.114080] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 306.115974] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 306.119279] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 306.122491] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 306.126987] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 306.127622] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 306.127876] dracut-initqueue[1065]: Warning: # #
[ 306.128132] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 306.128337] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 306.128587] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 306.128790] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 306.128987] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 306.129237] dracut-initqueue[1065]: Warning: # #
[ 306.129463] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 306.129663] dracut-initqueue[1065]: Warning: # #
[ 306.129910] dracut-initqueue[1065]: Warning: Reason unknown
[ 306.130152] dracut-initqueue[1065]: Warning: # #
[ 306.130352] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 307.720270] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 307.722128] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 307.725404] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 307.728671] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 307.737559] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 307.738196] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 307.738452] dracut-initqueue[1065]: Warning: # #
[ 307.738708] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 307.738914] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 307.739164] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 307.739364] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 307.739566] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 307.739816] dracut-initqueue[1065]: Warning: # #
[ 307.740053] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 307.740256] dracut-initqueue[1065]: Warning: # #
[ 307.740502] dracut-initqueue[1065]: Warning: Reason unknown
[ 307.740704] dracut-initqueue[1065]: Warning: # #
[ 307.740899] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 309.455427] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 309.460184] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 309.466021] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 309.469202] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 309.473706] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 309.474338] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 309.474592] dracut-initqueue[1065]: Warning: # #
[ 309.474849] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 309.475055] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 309.475304] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 309.475507] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 309.475718] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 309.475968] dracut-initqueue[1065]: Warning: # #
[ 309.476172] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 309.476368] dracut-initqueue[1065]: Warning: # #
[ 309.476615] dracut-initqueue[1065]: Warning: Reason unknown
[ 309.476815] dracut-initqueue[1065]: Warning: # #
[ 309.477011] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 311.115553] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 311.117485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 311.120879] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 311.124146] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 311.128669] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 311.129319] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 311.129575] dracut-initqueue[1065]: Warning: # #
[ 311.129831] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 311.130080] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 311.130338] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 311.130540] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 311.130736] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 311.130986] dracut-initqueue[1065]: Warning: # #
[ 311.131212] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 311.131412] dracut-initqueue[1065]: Warning: # #
[ 311.131658] dracut-initqueue[1065]: Warning: Reason unknown
[ 311.131860] dracut-initqueue[1065]: Warning: # #
[ 311.132054] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 312.815414] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 312.817348] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 312.820654] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 312.823908] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 312.828420] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 312.829046] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 312.829300] dracut-initqueue[1065]: Warning: # #
[ 312.829556] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 312.829762] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 312.830055] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 312.830261] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 312.830457] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 312.830709] dracut-initqueue[1065]: Warning: # #
[ 312.830912] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 312.831107] dracut-initqueue[1065]: Warning: # #
[ 312.831350] dracut-initqueue[1065]: Warning: Reason unknown
[ 312.831551] dracut-initqueue[1065]: Warning: # #
[ 312.831745] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 314.515347] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 314.517196] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 314.520499] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 314.523767] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 314.528254] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 314.528913] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 314.529169] dracut-initqueue[1065]: Warning: # #
[ 314.529424] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 314.529630] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 314.529880] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 314.530121] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 314.530345] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 314.530618] dracut-initqueue[1065]: Warning: # #
[ 314.530824] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 314.531019] dracut-initqueue[1065]: Warning: # #
[ 314.531267] dracut-initqueue[1065]: Warning: Reason unknown
[ 314.531470] dracut-initqueue[1065]: Warning: # #
[ 314.531665] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 316.235393] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 316.240106] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 316.245987] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 316.249223] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 316.253718] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 316.254356] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 316.254608] dracut-initqueue[1065]: Warning: # #
[ 316.254861] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 316.255064] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 316.255333] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 316.255537] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 316.255732] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 316.256001] dracut-initqueue[1065]: Warning: # #
[ 316.256207] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 316.256402] dracut-initqueue[1065]: Warning: # #
[ 316.256648] dracut-initqueue[1065]: Warning: Reason unknown
[ 316.256849] dracut-initqueue[1065]: Warning: # #
[ 316.257058] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 317.965413] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 317.970186] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 317.975983] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 317.979170] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 317.983639] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 317.984286] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 317.984539] dracut-initqueue[1065]: Warning: # #
[ 317.984796] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 317.985002] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 317.985253] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 317.985456] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 317.985653] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 317.985903] dracut-initqueue[1065]: Warning: # #
[ 317.986126] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 317.986323] dracut-initqueue[1065]: Warning: # #
[ 317.986567] dracut-initqueue[1065]: Warning: Reason unknown
[ 317.986768] dracut-initqueue[1065]: Warning: # #
[ 317.986963] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 319.685353] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 319.690046] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 319.695825] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 319.698979] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 319.703442] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 319.704070] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 319.704327] dracut-initqueue[1065]: Warning: # #
[ 319.704580] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 319.704784] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 319.705036] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 319.705241] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 319.705436] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 319.705684] dracut-initqueue[1065]: Warning: # #
[ 319.705886] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 319.706081] dracut-initqueue[1065]: Warning: # #
[ 319.706327] dracut-initqueue[1065]: Warning: Reason unknown
[ 319.706530] dracut-initqueue[1065]: Warning: # #
[ 319.706726] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 321.394696] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 321.396611] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 321.399913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 321.403233] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 321.407721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 321.408336] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 321.408590] dracut-initqueue[1065]: Warning: # #
[ 321.408843] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 321.409045] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 321.409296] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 321.409499] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 321.409693] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 321.409961] dracut-initqueue[1065]: Warning: # #
[ 321.410200] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 321.410399] dracut-initqueue[1065]: Warning: # #
[ 321.410647] dracut-initqueue[1065]: Warning: Reason unknown
[ 321.410851] dracut-initqueue[1065]: Warning: # #
[ 321.411045] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 323.095132] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 323.096970] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 323.100347] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 323.103585] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 323.108052] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 323.108683] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 323.108938] dracut-initqueue[1065]: Warning: # #
[ 323.109190] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 323.109393] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 323.109647] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 323.109850] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 323.110085] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 323.110339] dracut-initqueue[1065]: Warning: # #
[ 323.110542] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 323.110739] dracut-initqueue[1065]: Warning: # #
[ 323.110985] dracut-initqueue[1065]: Warning: Reason unknown
[ 323.111189] dracut-initqueue[1065]: Warning: # #
[ 323.111384] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 324.795341] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 324.797286] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 324.800608] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 324.803909] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 324.808391] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 324.809040] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 324.809295] dracut-initqueue[1065]: Warning: # #
[ 324.809546] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 324.809748] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 324.810000] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 324.810247] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 324.810444] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 324.810692] dracut-initqueue[1065]: Warning: # #
[ 324.810898] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 324.811094] dracut-initqueue[1065]: Warning: # #
[ 324.811339] dracut-initqueue[1065]: Warning: Reason unknown
[ 324.811542] dracut-initqueue[1065]: Warning: # #
[ 324.811737] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 326.418639] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 326.423378] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 326.426610] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 326.429870] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 326.438731] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 326.439356] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 326.439613] dracut-initqueue[1065]: Warning: # #
[ 326.439865] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 326.440103] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 326.440362] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 326.440566] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 326.440760] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 326.441027] dracut-initqueue[1065]: Warning: # #
[ 326.441232] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 326.441427] dracut-initqueue[1065]: Warning: # #
[ 326.441673] dracut-initqueue[1065]: Warning: Reason unknown
[ 326.441876] dracut-initqueue[1065]: Warning: # #
[ 326.442071] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 328.205369] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 328.207220] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 328.210547] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 328.213777] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 328.218234] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 328.218883] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 328.219139] dracut-initqueue[1065]: Warning: # #
[ 328.219393] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 328.219596] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 328.219844] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 328.220085] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 328.220289] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 328.220539] dracut-initqueue[1065]: Warning: # #
[ 328.220741] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 328.220936] dracut-initqueue[1065]: Warning: # #
[ 328.221183] dracut-initqueue[1065]: Warning: Reason unknown
[ 328.221385] dracut-initqueue[1065]: Warning: # #
[ 328.221580] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 329.905124] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 329.907030] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 329.910379] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 329.913586] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 329.922526] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 329.923150] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 329.923405] dracut-initqueue[1065]: Warning: # #
[ 329.923660] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 329.923863] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 329.924115] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 329.924318] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 329.924513] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 329.924760] dracut-initqueue[1065]: Warning: # #
[ 329.924963] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 329.925159] dracut-initqueue[1065]: Warning: # #
[ 329.925404] dracut-initqueue[1065]: Warning: Reason unknown
[ 329.925606] dracut-initqueue[1065]: Warning: # #
[ 329.925803] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 331.627850] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 331.629826] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 331.633168] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 331.636478] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 331.645516] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 331.646151] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 331.646404] dracut-initqueue[1065]: Warning: # #
[ 331.646655] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 331.646858] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 331.647110] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 331.647314] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 331.647512] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 331.647782] dracut-initqueue[1065]: Warning: # #
[ 331.647989] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 331.648186] dracut-initqueue[1065]: Warning: # #
[ 331.648432] dracut-initqueue[1065]: Warning: Reason unknown
[ 331.648634] dracut-initqueue[1065]: Warning: # #
[ 331.648828] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 333.327396] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 333.332047] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 333.335270] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 333.338512] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 333.343037] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 333.343682] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 333.343937] dracut-initqueue[1065]: Warning: # #
[ 333.344186] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 333.344389] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 333.344640] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 333.344844] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 333.345041] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 333.345290] dracut-initqueue[1065]: Warning: # #
[ 333.345493] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 333.345689] dracut-initqueue[1065]: Warning: # #
[ 333.345932] dracut-initqueue[1065]: Warning: Reason unknown
[ 333.346133] dracut-initqueue[1065]: Warning: # #
[ 333.346329] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 335.087316] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 335.091897] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 335.095116] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 335.098217] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 335.102721] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 335.103366] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 335.103620] dracut-initqueue[1065]: Warning: # #
[ 335.103873] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 335.104076] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 335.104328] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 335.104533] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 335.104752] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 335.105006] dracut-initqueue[1065]: Warning: # #
[ 335.105210] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 335.105406] dracut-initqueue[1065]: Warning: # #
[ 335.105649] dracut-initqueue[1065]: Warning: Reason unknown
[ 335.105851] dracut-initqueue[1065]: Warning: # #
[ 335.106047] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 336.845524] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 336.850347] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 336.856152] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 336.859382] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 336.863926] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 336.864549] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 336.864804] dracut-initqueue[1065]: Warning: # #
[ 336.865055] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 336.865258] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 336.865510] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 336.865712] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 336.865907] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 336.866156] dracut-initqueue[1065]: Warning: # #
[ 336.866360] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 336.866555] dracut-initqueue[1065]: Warning: # #
[ 336.866799] dracut-initqueue[1065]: Warning: Reason unknown
[ 336.866999] dracut-initqueue[1065]: Warning: # #
[ 336.867195] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 338.615468] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 338.620240] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 338.626065] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 338.629310] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 338.633743] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 338.634397] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 338.634649] dracut-initqueue[1065]: Warning: # #
[ 338.634903] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 338.635106] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 338.635358] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 338.635562] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 338.635756] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 338.636005] dracut-initqueue[1065]: Warning: # #
[ 338.636211] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 338.636408] dracut-initqueue[1065]: Warning: # #
[ 338.636651] dracut-initqueue[1065]: Warning: Reason unknown
[ 338.636852] dracut-initqueue[1065]: Warning: # #
[ 338.637047] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 340.315278] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 340.319913] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 340.325601] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 340.328741] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 340.333105] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 340.333705] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 340.333947] dracut-initqueue[1065]: Warning: # #
[ 340.334187] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 340.334383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 340.334659] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 340.334858] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 340.335045] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 340.335288] dracut-initqueue[1065]: Warning: # #
[ 340.335485] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 340.335675] dracut-initqueue[1065]: Warning: # #
[ 340.335860] dracut-initqueue[1065]: Warning: Reason unknown
[ 340.336089] dracut-initqueue[1065]: Warning: # #
[ 340.336285] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 342.037080] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 342.041612] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 342.044746] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 342.047914] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 342.052305] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 342.052912] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 342.053152] dracut-initqueue[1065]: Warning: # #
[ 342.053397] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 342.053596] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 342.053833] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 342.054026] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 342.054214] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 342.054455] dracut-initqueue[1065]: Warning: # #
[ 342.054652] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 342.054841] dracut-initqueue[1065]: Warning: # #
[ 342.055025] dracut-initqueue[1065]: Warning: Reason unknown
[ 342.055253] dracut-initqueue[1065]: Warning: # #
[ 342.055451] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 343.673319] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 343.677950] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 343.681193] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 343.686960] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 343.691330] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 343.691938] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 343.692178] dracut-initqueue[1065]: Warning: # #
[ 343.692420] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 343.692619] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 343.692856] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 343.693049] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 343.693237] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 343.693477] dracut-initqueue[1065]: Warning: # #
[ 343.693674] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 343.693861] dracut-initqueue[1065]: Warning: # #
[ 343.694094] dracut-initqueue[1065]: Warning: Reason unknown
[ 343.694290] dracut-initqueue[1065]: Warning: # #
[ 343.694477] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[2J[3J[-1;-1f[40m[2J[3J[-1;-1f[?25l[40m[-1;-1f[37m■ [33m■ [33m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[40m[-1;-1f[33m■ [33m■ [37m■ [39m[2J[3J[-1;-1f[49m[2J[3J[-1;-1f[?25h[2J[3J[-1;-1f[[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System.
[[0;32m OK [0m] Started [0;1;39mplymouth-start.ser…e[0m - Show Plymouth Boot Screen.
[[0;32m OK [0m] Started [0;1;39msystemd-ask-passwo…uests to Plymouth Directory Watch.
[[0;32m OK [0m] Reached target [0;1;39mcryptsetup.…get[0m - Local Encrypted Volumes.
[[0;32m OK [0m] Reached target [0;1;39mpaths.target[0m - Path Units.
[[0;32m OK [0m] Finished [0;1;39msystemd-udev-sett…To Complete Device Initialization.
Starting [0;1;39mmultipathd.servic…per Multipath Device Controller...
[[0;32m OK [0m] Started [0;1;39mmultipathd.service…apper Multipath Device Controller.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems.
[[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization.
[[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System.
[ 187.467377] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 187.469415] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 187.473337] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 187.477200] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 187.482582] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 187.483402] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 187.483737] dracut-initqueue[1065]: Warning: # #
[ 187.484054] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 187.484383] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 187.484694] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 187.484961] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 187.485282] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 187.485524] dracut-initqueue[1065]: Warning: # #
[ 187.485841] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 187.486099] dracut-initqueue[1065]: Warning: # #
[ 187.486402] dracut-initqueue[1065]: Warning: Reason unknown
[ 187.486643] dracut-initqueue[1065]: Warning: # #
[ 187.486952] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 189.120808] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 189.122922] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 189.126704] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 189.130485] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 189.135624] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 189.136460] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 189.136784] dracut-initqueue[1065]: Warning: # #
[ 189.137103] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include
[ 189.137431] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 189.137739] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified
[ 189.137981] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 189.138307] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory.
[ 189.138554] dracut-initqueue[1065]: Warning: # #
[ 189.138871] dracut-initqueue[1065]: Warning: #### Installer errors encountered during boot: ####
[ 189.139109] dracut-initqueue[1065]: Warning: # #
[ 189.139419] dracut-initqueue[1065]: Warning: Reason unknown
[ 189.139664] dracut-initqueue[1065]: Warning: # #
[ 189.139973] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors end ###############
[ 190.741582] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 190.743676] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]"
[ 190.747453] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]"
[ 190.751245] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]"
[ 190.756484] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts
[ 190.757315] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 190.757637] dracut-initqueue[1065]: Warning: # #
[ 272.645048] dracut-initqueue[1065]: Warning: ############# Anaconda installer errors begin #############
[ 272.645380] dracut-initqueue[1065]: Warning: # #
Hi there,
I've tried to install Fedora on my Rock 5 without success.

Booting with
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img
on SD-Card and source from
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso.

Board boots up fine but later starting in loop with
350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors end ###############
[ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 352.161387] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
"/dev/root" ]"
[ 352.164564] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
-ge "10" ]"
[ 352.167716] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
starting timeout scripts
[ 352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors begin #############
[ 352.172852] dracut-initqueue[1065]: Warning: #
#
[ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
has failed. Possible causes include
[ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
inst.repo boot parameters on the
[ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
verify that you have specified
[ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 352.173918] dracut-initqueue[1065]: Warning: Please also note that
the 'inst.' prefix is now mandatory.
[ 352.174156] dracut-initqueue[1065]: Warning: #
#
[ 352.174354] dracut-initqueue[1065]: Warning: #### Installer
errors encountered during boot: ####
[ 352.174543] dracut-initqueue[1065]: Warning: #
#
[ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown
[ 352.174970] dracut-initqueue[1065]: Warning: #
#

Full log file: see rock.txt

Has anybody more succcess ?

Greetings
Andreas

Fedora Info

Sunday, July 30, 2023

[fedora-arm] Fedora on Rock 5B

No comments:

Post a Comment