Hello.
A couple of weeks ago I upgraded my Orange Pi Zero Plus and my Sinovoip Banana Pi M64, both of which are based on Allwinner 64, from F39 to F40. That went fine so after that I attempted upgrading their UBoots and that did not work:
U-Boot SPL 2024.04 (Apr 03 2024 - 00:00:00 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
<froze here...>
So I reverted back to U-Boot SPL 2023.07.
This afternoon I tried upgrading the Banana Pi to this rc2 version and the result was quite similar:
U-Boot SPL 2024.10-rc2 (Aug 15 2024 - 00:00:00 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
<froze here...>
Again I reverted back:
U-Boot SPL 2023.07 (Oct 25 2023 - 00:00:00 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.9(release):
NOTICE: BL31: Built : 00:00:00, Aug 28 2023
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x20b0580, model: BananaPi-M64
U-Boot 2023.07 (Oct 25 2023 - 00:00:00 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: BananaPi-M64
DRAM: 2 GiB
Core: 75 devices, 21 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20ca0
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial
Out: serial
Err: serial
Allwinner mUSB OTG (Peripheral)
Net: eth0: ethernet@1c30000, eth1: usb_ether
starting USB...
<went on...>
For the record, I was able to upgrade my Raspberry Pi 3B's and my Radxa Rock Pi E's UBoots to 2024.04.
Best regards.
-----Original Message-----
From: Peter Robinson <pbrobinson@gmail.com>
Subject: [fedora-arm] U-Boot 2024.10 testing
Date: 2024.08.16 12:45:29
Hi Folks,
I've started building the 2024.10 RCs in F-41+ so it would be great to
get some testing.
I found that at least the Allwinner a64 devices looked like they
regressed in F-40 and I've tested the Pine64+ with the rc2 build and I
think they should be OK now.
It would be great if people could test and provide some feedback on
these builds as we go towards F-41 beta freeze.
Peter
No comments:
Post a Comment